Looking for some help with my Loop

[Dropndestroy213]

Hey guys so i started to set up my loop today and i need some advice.

Im trying to see how can i run my tubing (petg).

EK supremacy evo

Alphacool UT60 360mm

Alphacool Eisbecher D5 pump res combo mounted on fans

 

 

[Skiiwee29]

Turn your pump 90 degrees toward the camera. Take your out port and run that straight up and left to be parallel with the top edge of your graphics card up to your CPU. I would then go CPU to Radiator. Then Radiator into the top of your res as it looks like you have a port there. I would then plug the other bottom port of your pump/res. Thats how I would do it personally. 

[Dropndestroy213]

30 minutes ago, legacy99 said:

Turn your pump 90 degrees toward the camera. Take your out port and run that straight up and left to be parallel with the top edge of your graphics card up to your CPU. I would then go CPU to Radiator. Then Radiator into the top of your res as it looks like you have a port there. I would then plug the other bottom port of your pump/res. Thats how I would do it personally. 

i cant put the pump fittings to the front it will hit the glass

Also how would i fill.

[Mick Naughty]

Could get a dual or triple inlet top. Use the rad as a full point. 

[Dropndestroy213]

On 4/24/2017 at 0:00 PM, Mick Naughty said:

Could get a dual or triple inlet top. Use the rad as a full point. 

i wish i could Alphacool dosent make a multi port top for this res

[Mick Naughty]

Would have to know the tread and pitch. Just by the look, it seems just like mine but its black. Has a 3 port.

 

Shoud be fine making the extra bends and using the bottom ports.