my computers not booting properly

[MasterLow]

for so.e reason i just put the i3 chip into my pc so i can upgrade the bios to support my 7th gen i5 but it starts up and goes straight to windows (running windows 7) thr nit where the pieces of the flag go around in spirals and connect togetger to make the windows flag, but it only gets to the start of that when i get the blue screen of death and my pc resets itself. if someone can help me i would be very greatful and also system rrpair doesnt work because it says it cant repair the problem automatically.

 

Heres my specs atm

 

https://nz.pcpartpicker.com/list/9YbDTH

Edited March 23, 2017 by MasterLow

[tp95112]

If it goes straight to windows try reseting the bios by clearing cmos, there is a section that skips bios on load for faster boots.

[MasterLow]

Just now, tp95112 said:

If it goes straight to windows try reseting the bios by clearing cmos, there is a section that skips bios on load for faster boots.

By resetting it you mean just remove the battery and put it back in???

 

[tp95112]

There should be two pins that are labeled clear cmos

[ministrsinister]

So... did you upgrade to an i5 from an i3 or vice versa and after you updated your BIOS you got a bluescreen? You could also try to reseat your CPU if thats what you said, i'm not sure if thats what you meant. 

 

Try what @tp95112 is suggesting though, cause the culprit also might be corrupt BIOS settings

[MasterLow]

16 minutes ago, tp95112 said:

If it goes straight to windows try reseting the bios by clearing cmos, there is a section that skips bios on load for faster boots.

Ok so i cant reset the cmos but i can get into my bios 

[tp95112]

Just now, MasterLow said:

Ok so i cant reset the cmos but i can get into my bios 

Then now you can update your bios to the latest revision

[MasterLow]

Bios is running sweet and windows start up repair works all good but in still getting the same blue screen of death at windows 

[tp95112]

4 minutes ago, MasterLow said:

Bios is running sweet and windows start up repair works all good but in still getting the same blue screen of death at windows 

 

 

Only solution is to do a fresh install, which is what you always should do with a cpu upgrade. Also make sure your bios verson is 2003 or higher(from this article )