Is this a cool idea?

[Guest]

By cool I mean the cold cool...

I am a scetchup pro... I know.

But you get the idea right?

 

In therms of fnas I am going for Noctua NF-F12.

Blocks and rads form acool and EKL

 

Thanks!

[Extingquish]

With regards to having positive pressure, I would either add an intake fan or take away an exhaust fan

[Guest]

With regards to having positive pressure, I would either add an intake fan or take away an exhaust fan

Ok, why possitive?

Some say negative couse then you have less gunk build up...

[Extingquish]

Ok, why possitive?

Some say negative couse then you have less gunk build up...

To have less gunk build up its positive pressure, any air passing through gaps in the case would be going out, but with negative the air would be flowing in and bringing dust with it and also with dust. Any other air would be coming in through filtered fan intakes.

 

It's an easy mistake to make though 

[SLPNTIM]

i have heard that getting closer to 0 is much better than positive or negative also i would have added another rad in the front if i could.

[amintha1992]

make the quad rad  a tipple rad and add a dual rad to the front. this will make the air flow a bit on the positive side but not too much to the point where there is no air moving

[topsu]

750D Supports 360mm radiator max I think.

 

 

 

To have less gunk build up its positive pressure, any air passing through gaps in the case would be going out, but with negative the air would be flowing in and bringing dust with it and also with dust. Any other air would be coming in through filtered fan intakes.

 

It's an easy mistake to make though 

Exacly, except you can have negative pressure but you need to have dust filter in every hole that is not exhaust.

 

 

i have heard that getting closer to 0 is much better than positive or negative also i would have added another rad in the front if i could.

 

 

Positive is a lot better in gunkwise, that means all the extraholes are used as exhaust instead of intakes which makes your case more dustfree

[airdeano]

By cool I mean the cold cool...

build.PNG

I am a scetchup pro... I know.

But you get the idea right?

Thanks!

 

so sorry to say, the 480 will not natively fit a Corsair 750D:

 

[Guest]

so sorry to say, the 480 will not natively fit a Corsair 750D:

 

 

take 

wohoops… OK, thanks

 

so I´ll go for triple 60mm top and double monsta in the front as intake

 

BTW: Does anyone know good SP fans which have 140mm and a PWM connector?

Or can I use the stock one for the front radiator (as I said monsta, so I need some power)

[N00B_person]

get rid of the fan on the bottom. Use it as an exhaust.