its nothing, right?

[Guest]

so ive been having some issues with my first build *kill me*, and i noticed that before the ram LED turns on (which i knew of, i rmaed my ram and now imma my mobo bcus my ram works), the cpu led flashes. these are the ez debug leds on the mobo. am i overworrying/ or will this be fixed my a replacement mobo,?

[DoctorZeus]

what board? 

[Guest]

Just now, DoctorZeus said:

what board? 

msi b250m gaming pro. i just dissasembled to rma it so i cant try again. if its wrong qith the mobo its fine, but if its the cpu ugh

[Guest Kloaked]

The LED debug will always show numbers. They tell you what the PC is doing as it boots. It doesn't always mean that there's an error.

[Guest]

1 minute ago, Kloaked said:

The LED debug will always show numbers. They tell you what the PC is doing as it boots. It doesn't always mean that there's an error.

its just the led turning on & off quickly. sorry for being so worried this is my first build, i got everything weeks ago, nothing has worked and im very stressed

[DoctorZeus]

3 minutes ago, Ethan Meskin said:

its just the led turning on & off quickly. sorry for being so worried this is my first build, i got everything weeks ago, nothing has worked and im very stressed

If it turns off you're fine. Your manual says it will stay on or flashing if there's a problem.

 

It's okay to be worried. Stuff not working can indeed be really frustrating.

 

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-K/E11133_MB_Pin_Definition_v2_web_only.pdf?_ga=1.74365394.1130373137.1487708462

[Guest]

1 minute ago, DoctorZeus said:

If it turns off you're fine. Your manual says it will stay on or flashing if there's a problem

 

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-K/E11133_MB_Pin_Definition_v2_web_only.pdf?_ga=1.74365394.1130373137.1487708462

msi, not asus this is the mobo https://www.msi.com/Motherboard/B250M-GAMING-PRO.html#productFeature-section

[Guest]

2 minutes ago, DoctorZeus said:

If it turns off you're fine. Your manual says it will stay on or flashing if there's a problem

 

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-K/E11133_MB_Pin_Definition_v2_web_only.pdf?_ga=1.74365394.1130373137.1487708462

also the 24 pin didnt fully *clip* in. it went nearly all in but didnt click. thats ok right

[DoctorZeus]

1 minute ago, Ethan Meskin said:

also the 24 pin didnt fully *clip* in. it went nearly all in but didnt click. thats ok right

It's the same thing from looking at the manual for the msi board. Like a car, problem means light will stay on.

 

The 24 pin should be secure. Try reseating it?

[Guest]

Just now, DoctorZeus said:

It's the same thing from looking at the manual for the msi board. Like a car, problem means light will stay on.

 

The 24 pin should be secure. Try reseating it?

i took everything apart, and i cant test now anyway, i have no ram ( i tried to rma it)

[Markthebeginner]

20 minutes ago, Ethan Meskin said:

its just the led turning on & off quickly. sorry for being so worried this is my first build, i got everything weeks ago, nothing has worked and im very stressed

Hello, i have the same board,

when u turn it on its gonna flash the lights as it check/tells you if they will work, it turns off after its it doesnt something is wrong

 

for fun build:

i5 7500 kaby lake

msi b250

g skill 16gb 2133mhz

Evga 1060 6gb SC

hyper 212 evo

corsair 650w bronze

2x intake 1 exhaust fan

[Guest]

26 minutes ago, Markthebeginner said:

Hello, i have the same board,

when u turn it on its gonna flash the lights as it check/tells you if they will work, it turns off after its it doesnt something is wrong

 

for fun build:

i5 7500 kaby lake

msi b250

g skill 16gb 2133mhz

Evga 1060 6gb SC

hyper 212 evo

corsair 650w bronze

2x intake 1 exhaust fan

nice. did you also have any issues with the 24 pin connector?

[Markthebeginner]

no, well it does take abit of force to "put it in" but just do it gently but with force "pun intended"

[Markthebeginner]

Just now, Markthebeginner said:

no, well it does take abit of force to "put it in" but just do it gently but with force "pun intended"

and make sure u hold the clip up

[Guest]

Just now, Markthebeginner said:

no, well it does take abit of force to "put it in" but just do it gently but with force "pun intended"

i did my best, but it probably didnt go all the way in. would that have affected the ram

[Markthebeginner]

Just now, Ethan Meskin said:

i did my best, but it probably didnt go all the way in. would that have affected the ram

no, u can try and do a wiggle motion when u put it in, or push one side then the other 

[Guest]

Just now, Markthebeginner said:

no, u can try and do a wiggle motion when u put it in, or push one side then the other 

ok. what was that "no" referring to

[Markthebeginner]

Just now, Ethan Meskin said:

ok. what was that "no" referring to

shouldnt have damaged your ram

[Markthebeginner]

was it the b250 pc mate from msi u had again?

[Guest]

Just now, Markthebeginner said:

was it the b250 pc mate from msi u had again?

gaming pro

[Markthebeginner]

1 minute ago, Ethan Meskin said:

gaming pro

right, nearly the same just make sure u press it down so it clicks shouldnt take all of your force but i cant take abit, make sure ur pull the clip on the 24 pin power connector

make sure u connect the 8 pin Cpu power connector and the rest of the stuffs turn on it should post /boot if u have windows 10 installed

[Markthebeginner]

3 minutes ago, Ethan Meskin said:

gaming pro

what Psu do you have?

[Guest]

1 minute ago, Markthebeginner said:

what Psu do you have?

cx450m

[Guest]

2 minutes ago, Markthebeginner said:

right, nearly the same just make sure u press it down so it clicks shouldnt take all of your force but i cant take abit, make sure ur pull the clip on the 24 pin power connector

make sure u connect the 8 pin Cpu power connector and the rest of the stuffs turn on it should post /boot if u have windows 10 installed

i have no ram. also this is my first build and i havent even booted yet as i think my mobo is dead (it says the ram is the issue but the ram works)

[Markthebeginner]

3 minutes ago, Ethan Meskin said:

i have no ram. also this is my first build and i havent even booted yet as i think my mobo is dead (it says the ram is the issue but the ram works)

right, can u link everything u have please?  i know this may be annoying il check for compatability power draw:D