PC doing strange stuff

[CoffeeCup]

Hello,

 

I am in need of some help. So yesterday i moved my PC parts from my old case to a new case. After about 2 hours of work I was done. After i booted it up after 2 seconds it went knto endless loop of rebooting. I tried withlit RAM and then putting it back, in which gave me more time (30 seconds before endless loop of rebootimg) and i was also getting 0 display.

It'strange becuase i can see my system and all the fans/lights were working and I heard no error beeping sounds or anything like that .

I am not really sure what is causing the rebooting,maybe i plugged something in the wrong place or something like that,and i would appreciate some help with 0 display problems becuase before i moved it to a new case everything was working just fine .

This are my specs:

 

i5-4460

RX 470 Platinum Edition

8GB of DDR3 RAM

H81M-DG4 MOBO

1TB WD HDD

550W XFX TS PSU

3 Case fans

S340 Black Edition Case

 

Any help would be greatly appreciated.

Btw was not sure where to post this so I hope i posted this at the right place.

[genexis_x]

Cpu overheating?

[redscape]

Just try unplugging and plugging back the cables as a first step. 

[CoffeeCup]

1 minute ago, ZM Fong said:

Cpu overheating?

Well it wasn't overheating in the past year and the CPU fan spins as usual when I turn on the PC

 

[redscape]

Just now, Red____14 said:

Just try unplugging and plugging back the cables as a first step. 

Also, what is your CPU cooler?

 

[CoffeeCup]

3 minutes ago, Red____14 said:

Also, what is your CPU cooler?

 

Just the stock cooler

But is 6 months old and no signs of malfunctioning.

And it's keeping my 4460 below 70 c

[CoffeeCup]

6 minutes ago, Red____14 said:

Just try unplugging and plugging back the cables as a first step. 

Okay will do 

[CoffeeCup]

15 minutes ago, Red____14 said:

Just try unplugging and plugging back the cables as a first step. 

Well that did nothing

Any more tips ?

[BethFoster5841]

can you get into the bios if so then try and run soemthing like Ubuntu from a usb if that works it may be windows

[CoffeeCup]

1 minute ago, ms-DOS said:

can you get into the bios if so then try and run soemthing like Ubuntu from a usb if that works it may be windows

The problem is I get 0 display

Like it just says no signal. 

So problems:

1. No display

2. Random rebooting 

[BethFoster5841]

ok do you have a graphics card in that pc

[CoffeeCup]

1 minute ago, ms-DOS said:

ok do you have a graphics card in that pc

Yup 

[BethFoster5841]

DAM that is one thick card ok try removing the card and do a clear CMOS then run plug your pc in to the mobo video port

[Domas_J]

I had something like that few months ago... You probably just put cpu cooler wrong or thermal paste... I did that and it was good again. I hope it helps

 

[CoffeeCup]

4 minutes ago, ms-DOS said:

DAM that is one thick card ok try removing the card and do a clear CMOS then run plug your pc in to the mobo video port

Clear CMOS?

Sorry I am not familiar with that term 

[CoffeeCup]

3 minutes ago, Domas_J said:

I had something like that few months ago... You probably just put cpu cooler wrong or thermal paste... I did that and it was good again. I hope it helps

 

Good suggestion

But it's a prebuildt pc

I know I know I should have buildt it myself.

Hmmm 

Is it possible while I was moving it that I could have damaged the cooler or something by accident?

Because it was working fine until now

[BethFoster5841]

13 minutes ago, CoffeeCup said:

 

The battery neer your sataports thair should be a jumper next to it put it up one then start the system WITH OUT THE GRAPHICS CARD AND USE THE ONBORD VIDEO PORT

[CoffeeCup]

18 minutes ago, ms-DOS said:

The battery neer your sataports thair should be a jumper next to it put it up one then start the system WITH OUT THE GRAPHICS CARD AND USE THE ONBORD VIDEO PORT

But my ONBOARD VIDEO PORT IS DISABLED. 

I think