Would be doing a loop like this bad?

[Adaraas]

 

 

This is the way I'd be doing it, It'd go  RES>Pump>Rad480-1>Rad480-2>CPU>GPU>Res

 

I understand that doing it in any order is fine, but I'm not sure about doing two rads in a row.

 

Also, good GPU block? I was thinking of going Ek, but not sure.

[Scia]

Loop-order is fine.

 

Depends on the GPU =P

Aquacomputer makes awesome blocks.

[Timmyfox]

As long as res is before pump, it's fairly hard to go wrong with the loop order.

[BCMods]

That run from the bottom to top rad will be a big pita to get looking neat... D:

[Alex(PlayMedium)]

The run from the GP to the res seems like the biggest problem, look at how it went in linus's rig, why not go:

res>pump>bottomRad>GPU>CPU>topRad>res?

Then you could have the inlet for the res on it's top, depends on if you like it this way or not.

[Adaraas]

That run from the bottom to top rad will be a big pita to get looking neat... D:

It'll be run behind the motherboard tray.

 

The run from the GP to the res seems like the biggest problem, look at how it went in linus's rig, why not go:

res>pump>bottomRad>GPU>CPU>topRad>res?

Then you could have the inlet for the res on it's top, depends on if you like it this way or not.

I personally like the way it looked.

[Alex(PlayMedium)]

I personally like the way it looked.

Well then just do it that way, good for you

[topsu]

If you had it like RES>Pump>Rad480-1>CPU>Rad480-2>GPU>Res

 

I think you would get a bit better gpu temps

[Ghost]

That's what a standard 900D loop looks like.

 

@topsu Loop order makes no difference to temps.

[topsu]

That's what a standard 900D loop looks like.

 

@topsu Loop order makes no difference to temps.

 

 

 

Even when After first radiator water tempature would be Delta T 0 which would make second right after it useless? Or am I understanding something wrong?

[Ghost]

Even when After first radiator water tempature would be Delta T 0 which would make second right after it useless? Or am I understanding something wrong?

 

The range of temperatures of a coolant is small. It's the avergae temp that goes up.

[Tohrchur]

I would go res>pump>480-1>gpu>cpu>480-2>res. It would make for a much cleaner looking route imo

[Ghost]

I would go res>pump>480-1>gpu>cpu>480-2>res. It would make for a much cleaner looking route imo

That long run should/is going behind the back plate. The direct line from the res to the GPU will/should also droop below the mid-plate section so you won't be able to see it.

[Tohrchur]

That long run should/is going behind the back plate. The direct line from the res to the GPU will/should also droop below the mid-plate section so you won't be able to see it.

If he does it like that it would great!