PC keeps rebooting

[trini11413]

New guy here so i took the plunge and built my first PC. Everything went well when the build was completed for the first couple days. After i installed a driver from gigabyte website this issue now occurs PC keeps rebooting i can get into the bios but after i make the adjustments that are needed it just starts the same thing over again.   This is my build  https://pcpartpicker.com/user/trini11413/saved/#view=cb3ZLk

any help will be welcomed hitting a brick wall here youtube link

 

Edited December 29, 2016 by trini11413

[Tedster]

3 minutes ago, trini11413 said:

New guy here so i took the plunge and built my first PC. Everything went well when the build was completed for the first couple days. After i installed a driver from gigabyte website this issue now occurs PC keeps rebooting i can get into the bios but after i make the adjustments that are needed it just starts the same thing over again.   This is my build  https://pcpartpicker.com/user/trini11413/saved/#view=cb3ZLk

any help will be welcomed hitting a brick wall here

Welcome to the Forum!

Did you install a driver or a BIOS update?

Also, try clearing your CMOS.

[trini11413]

correction tryed installing bios update but yes i did clear the CMOS

 

[Tedster]

1 minute ago, trini11413 said:

correction tryed installing bios update but yes i did clear the CMOS

 

It's possible that the BIOS update didn't quite go correctly. In that case, you might be able to try flashing it again, or perhaps an earlier revision. Else, you might want to RMA the board...

[PCGeek]

5 minutes ago, trini11413 said:

correction tryed installing bios update but yes i did clear the CMOS

 

Gigabyte has had issues with flaky BIOS firmware.  I would recommend resetting BIOS to defaults and see if it stabilizes.  Also try reverting to the previous BIOS revision.  Another thing is do you have an overclock as it maybe causing the issue.  Try to reset to stock clock and voltage to see if everything is normal.

[TheRandomness]

Have you disassembled it and put it back together again? For some reason, that sometimes works. 

[trini11413]

3 minutes ago, PCGeek said:

Gigabyte has had issues with flaky BIOS firmware.  I would recommend resetting BIOS to defaults and see if it stabilizes.  Also try reverting to the previous BIOS revision.  Another thing is do you have an overclock as it maybe causing the issue.  Try to reset to stock clock and voltage to see if everything is normal.

 

no OC's  but ill try reverting again 

[trini11413]

4 minutes ago, TheRandomness said:

Have you disassembled it and put it back together again? For some reason, that sometimes works. 

took it apart last night same thing though 

[trini11413]

17 minutes ago, trini11413 said:

no OC's  but ill try reverting again 

cleared it but problem still there