Jump to content

High Temps on H100I GTX

ChiefGunny
 Share
Posted

I'm using a Corsair H100I GTX on a 4790k stock speed and getting temps of 73C at 60% load during gaming. Also when i put my hand on the back of the rad i can only feel a small amount of warmth coming from the very bottom of the rad. Im using Arctic Silver Ceramique. It also done this with the factory stuff and Arctic Silver 5. I have the fans pulling air and the tubes are on the bottom of the rad. Do you think it might not have been filled properly? Don't think its gunked since its always acted like this. The case its in is a Antec 1200 way more than enough ventilation. Any help would be much appreciated. Thank you.

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Defective pump maybe?

i5-6600k (4.6) | Dark Rock 3 | MSI GAMING X 1060 6GB | 8GB DDR4 | 120GB SSD & 1TB HDD | Crystal 460x

 | Acer GN246HL 1080p 24" 144hz & Acer G246HL 1080p 24" 60hz |

PSU Tier List | PC Partpickers: US Canada Australia UK

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

After plugging the h100i into the OPT plug instead of the CPU fan plug temps dropped a lot. Funny thing is it still says the pump in running the same speed and fans to. but the issue with this is the fans don't register all the time.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Well how at the fans being ran? are you using the corsair link software? The pump speed wont change. Just gotta set the fan rpms based of temp. That's pretty high but I never put a aio on my 4790k.

Main RIg Corsair Air 540, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

yes corsair link and yes the pump speed changes with temp also. 2 speeds.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Well the original h100 pump speed never moved, didn't have my gtx long enough to find out. Sounds like you just need to plug the fans into the mobo

Main RIg Corsair Air 540, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

sounds like you need to remount it. It's probably not flush. Mount the block with the tubes relaxed (take it out of the case) or you won't be able to get a flush mount. The tubes are very stiff.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Bequiet Dark Rock Pro 4   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×