SicMOD_1 Desk

[g14ez]

Hello every one My name is Geremy and I would like to share with you guys my very first full mod.

this mod is 90% complete. Although both computers are fully functional there are few additions finish that would allowed me to say it is finish.

 

 

 

For the specs:

 

Left Side
CPU=         intel I7 6700k
Motherboard=    MSI M9 
SSD(m.2)=     2x M.2 Samsung 950pro 256BG (raid 0 512)
SSD=         2x Samsung 850 evo 500GB (raid 0 1TB)
Mem Ram=    2x 8GB DDR4 G.Skills Ripjaws V (16GB @3666M)
GPU=        MSI GTX 1080 Seahawlk EK block
PSU=        Corsair AX1200i 

Right Side 
CPU=         intel I7 4790k
Motherboard=    Asus ROG Maximus Hero 
SSD=         2x Samsung 850 evo 500GB (raid 0 1TB)
HDD=        2x 3TB WD red and 1x 6TB (raid 5 6TB)
Mem Ram=    2x 8GB G.Skills Ripjaws V (16GB)
GPU=        (EVGA GTX 760) 
PSU=        Corsair AX1200i 

Mods
1) Constructed Table.
2) Constructed Monitor support for mounts.
3) Paint job for everything.
4) Constructed Middle Fan Grills.
5) Carbon fiber vinyl wrap.
6) Constructed  Acrylic motherboard tray.
7) Water cooled both systems.
8) LED lights for the table top glass, mother board tray and interior and reservoir.
9) 3D printed custom made front panel for anti vandal switches and USB ports.
10)Acrylic top with polished edges

 

 

 

 

 

 

[g14ez]

First I would like to say that this build was inspire by Crossdesk from  redharbinge, Lian Le pc desk and many more modders that fulfill my inspiration.

 

I had design the body by making blue-prints guided by many pc desk specially the cross desk. I still have all my documentation if any one is interested in the material.

 

First I started the build as follow:

 

 

 

I did had any metal bender or metal shop around my place but i did not let that stop me. I did it out of wood knowing the risks and dangers but with addition of another material I believed to have made it a bit more safe for me and my computer components.

 

 

the last picture demonstrates one of my attempts to create my own motherboard made of acrylic. Then I went and created the frames of the legs.

 

Then I moved toward the pc back panel with water fitting cut outs.

 

Then i turned them into metal by spray painting and covering the wood with carbon fiber vinyl wraps

 

I added metallic fencing sheets for it to look more metallic. I then wrapped the mother board base also.

 

res

 

It was time to list and group my parts.

 

 

 

Water!

 

Earth

 

Wind!

 

 

 

I had the idea to make my own fan grills

 

 

Painted my motherboard trays and connector fittings 

 

Started placing some of the components as place holders

 

 

Bought external grills to save time. Placed my fans in place

 

 

Last minute replaced ment from m7 to m9

 

At this time I unbleached the dragons

 

 

 

[g14ez]