CableMod Custom Cables Help

[JacobGunther12]

In December, I am gonna be building a new PC. I am not familiar with hand-sleeving custom cables so I am just gonna use CableMod. I don't know enough about PSU cables to know what cables I need to sleeve cables. I am using the CableMod Configurator by the way. Here's my current part list: PCPartPicker Part List. What cables do I need? If you haven't seen the list, I have the EVGA SuperNOVA 750 G2 PSU.

 

EDIT: For a better understanding, I am asking what are the names of the cables I need in order to add them to the CableMod Configurator so I can add that permalink to my part list so when I buy, so I have the correct cables in order to replace all PSU cables that I see through my case window.

[Skiiwee29]

You will need the following:

 

1 8 pin EPS or 4+4 EPS (Provides CPU power)

1 24 pin Motherboard 

2 6+2 PCIe for Graphics card power (You could get 2 8 pin, but the 6+2 would give you flexibility for future upgrades)(Double this if you plan to SLI at any point)

1 or 2,  3 or 4 Sata power cables

You could also get Molex if you need it as well as Sata data cables. But the above list will provide bare bones of what you will need. 

[JacobGunther12]

3 hours ago, JacobGunther12 said:

In December, I am gonna be building a new PC. I am not familiar with hand-sleeving custom cables so I am just gonna use CableMod. I don't know enough about PSU cables to know what cables I need to sleeve cables. I am using the CableMod Configurator by the way. Here's my current part list: PCPartPicker Part List. What cables do I need? If you haven't seen the list, I have the EVGA SuperNOVA 750 G2 PSU.

Ok, thanks. You helped a lot! +1 rep

[Skiiwee29]

40 minutes ago, JacobGunther12 said:

Ok, thanks. You helped a lot! +1 rep

You're welcome. I have one of their sleeved kits that I bought from Performance-pcs.com one of their partners and love them. Only issue is with the cable combs personally. They are quite fragile and do break fairly easily.