NO POST after GPU update

[applekillsmsft]

Howdy y'all! I am a broke ass college student away from home and my computer has decided that today - the day with the most amount of work to be done - that it should commit suicide after an NVIDIA GPU update. My specs are as follows

 

Gigabyte H110M-S2HP MB

Intel G4400 with Hyper 212 Evo

8 GB Crucial DDR4 2133 MHz memory

GTX 950

120GB SanDisk Boot SSD, 3TB WD Blue, 500GB WD Caviar Blue

500W EVGA PSU

 

The speaker doesn't beep any post codes, the monitor gets no output and the computer basically just sits lifeless. I have taken it completely apart and reassembled it so there are no loose connections and the PSU is just fine. 

 

Can anyone give me any steps that might fix this? I am in the process of trying to get an RMA, but I cannot have this computer out of commission for that long (especially with the slow snail mail that we have here.)

 

It ran TF2 and Diablo III just fine last night. This morning: nothing. 

 

Thanks for any help anyone can give me

 

[Corrupt_Liberty]

Remove the video card and use on-board graphics until your RMA  goes through?  At the very least to see if that's the issue.

[IND4Z0NE]

Have you tried clearing the CMOS yet?

[applekillsmsft]

On 12/09/2016 at 8:44 PM, Corrupt_Liberty said:

Remove the video card and use on-board graphics until your RMA  goes through?  At the very least to see if that's the issue.

I wish. It won't even post without the GPU

[applekillsmsft]

On 12/09/2016 at 8:46 PM, IND4Z0NE said:

Have you tried clearing the CMOS yet?

First thing I tried. 

[jello77]

Have you tried removing the power and reset button cables and using a screwdriver to hotwire the mobo to boot?

[Corrupt_Liberty]

How do you know the PSU is good?  What happens exactly when you press the power button?  Have you tried bypassing the power button by shorting the pins with a screwdriver?  Are any LEDs on?  Do any LEDs come on or go out when you press the power button? Do any fans spin up?