Titan X(P) GPU Boost Problem ??

[vamrick]

recently installed a waterblock on my titan xp. Pre block on air i was getting 2088hz. Now its stuck at the base boost 1417hz. I cannot add power limit mhz or anything or my display driver crashs or hard locks. I have ran DDU and uninstalled the driver and tried and older driver im at a total loss. I also reformatted my computer. ... HELP

[Katsunaka]

Something's getting hot and shutting down the card.

 

Why don't you try to make sure the waterblock is installed correctly, the thermal pads are on their correct spots, and it has enough TIM. GPU's use ALOT more TIM than a CPU, so that pea sized crap isn't enough for a GPU. 

 

A CPU has an integrated heat spreader, a GPU doesn't have anything. 

[vamrick]

temp never gets above 34C card is physically cool to the touch

[vamrick]

well by cool i mean not over 34c  haha

[KiBlast9000]

Did you use something like MSI Afterburner to see if you can still overclock it?

[vamrick]

I have used MSI after burner , Evga Percision and both do the same thing if i apply any boost my display driver crashs its idles down to 300 mhz while sitting but only goes up to 1417 which is BASE clock it seems like gpu boost is not working and im lost because i have reformatted so im not to sure what else it could be

[KiBlast9000]

I don't want to recommend you to update to the anniversary update(if you haven't already). The most I could say is to try another clean driver install directly from Nvidia's website and not from GF Experience.

[vamrick]

as a side note my voltage maxs out at .742  not sure if thats limiting my boost or my card doesnt need more since its only boosting to base clock ?

[vamrick]

update its not hitting Powerlimit or voltage limit so its just stopping at BASE clock . Does anyone have any idea how to get this thing to boost?