Phanteks Eclipse P400 LED Strip

Grovers1 · July 24, 2016

I have plans to buy a Eclipse P400 case from Phantek and I want LEDs for it, I'm from Australia and I was told that the phanteks LEDs arnt to good. I was wondering what other options there might be. (Hopefully from Mwave, MSY or eBay)

Thanks

AddonCustoms · July 25, 2016

We had requests from customers asking for us to make Phanteks LEDs as the phanteks ones are not good and no where else made compatible LEDs, so we now make a compatible kit for their cases. As far as we can tell we are the only store/manufacture that makes them.

You can find them listed on our store here - https://addoncustoms.com/store/product/77-phanteks-compatible-rgb-lighting/ - Comes with a black PCB, extra strong sticky back foam and a sleeved cable on both ends. There are 1 meter and 2 meter options.

Happy to answer any questions you may have.

Grovers1 · July 25, 2016

1 hour ago, AddonCustoms said:

We had requests from customers asking for us to make Phanteks LEDs as the phanteks ones are not good and no where else made compatible LEDs, so we now make a compatible kit for their cases. As far as we can tell we are the only store/manufacture that makes them.

You can find them listed on our store here - https://addoncustoms.com/store/product/77-phanteks-compatible-rgb-lighting/ - Comes with a black PCB, extra strong sticky back foam and a sleeved cable on both ends. There are 1 meter and 2 meter options.

Happy to answer any questions you may have.

The price that your selling them for come to about $28AUD (not including whatever postage is) and I didn't allow more than $20AUD.

Unless it was possabe for me to get them for under 20AUD then I don't think I'll be getting them. Maybe if there was a sale or discount.

The Phantek led strips, what's wrong with them? If it's just mounting them I might beable to find my own fix somehow.

AddonCustoms · July 25, 2016

1 minute ago, Grovers1 said:

The price that your selling them for come to about $28AUD (not including whatever postage is) and I didn't allow more than $20AUD.

The Phantek led strips, what's wrong with them? If it's just mounting them I might beable to find my own fix somehow.

I have only handled 1 set of their LEDs, as I had to work their wiring so I could make ours. First issue was locating a set, every store I found was sold out, when I finally did get a set the wires that were soldered onto the strip snapped off and I was barely touching it, this rendered the whole set dead. (but got the info I needed)

If you do go with a official Phanteks set, try not to move the wires as they may break.

But we got requests to make them because apparently the LEDs died out quickly and the sticky was bad (but the sticky is bad on pretty much every LED strip unless they use foam) I cannot comment on the LEDs as our phanteks set has never been on for more than a few minutes. but if the phanteks LEDs do die out that should be covered by their warranty, so they should either fix or replace them