usb port problem help please !!

[TanmayHembram]

my windows shows some warning and system hangs up on having USB pen drive for too long and system hangs up too one of my PC tuner shows up a certain problem.

any suggestion for correcting this problem ?

 

 

[Skiiwee29]

Open Command Prompt in Administrator Mode and run the following command: sfc /scannow and see if it detects any errors. If not, then run the next: chkdsk /F /R and then reboot your PC and let it run. Here is all the commands and options available to you under the chkdsk section. 

 

C:\Windows\system32>help chkdsk
Checks a disk and displays a status report.

CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B] [/scan] [/spotfix]

  volume              Specifies the drive letter (followed by a colon),
                      mount point, or volume name.
  filename            FAT/FAT32 only: Specifies the files to check for
                      fragmentation.
  /F                  Fixes errors on the disk.
  /V                  On FAT/FAT32: Displays the full path and name of every
                      file on the disk.
                      On NTFS: Displays cleanup messages if any.
  /R                  Locates bad sectors and recovers readable information
                      (implies /F, when /scan not specified).
  /L:size             NTFS only:  Changes the log file size to the specified
                      number of kilobytes.  If size is not specified, displays
                      current size.
  /X                  Forces the volume to dismount first if necessary.
                      All opened handles to the volume would then be invalid
                      (implies /F).
  /I                  NTFS only: Performs a less vigorous check of index
                      entries.
  /C                  NTFS only: Skips checking of cycles within the folder
                      structure.
  /B                  NTFS only: Re-evaluates bad clusters on the volume
                      (implies /R)
  /scan               NTFS only: Runs a online scan on the volume
  /forceofflinefix    NTFS only: (Must be used with "/scan")
                      Bypass all online repair; all defects found
                      are queued for offline repair (i.e. "chkdsk /spotfix").
  /perf               NTFS only: (Must be used with "/scan")
                      Uses more system resources to complete a scan as fast as
                      possible. This may have a negative performance impact on
                      other tasks running on the system.
  /spotfix            NTFS only: Runs spot fixing on the volume
  /sdcleanup          NTFS only: Garbage collect unneeded security descriptor
                      data (implies /F).
  /offlinescanandfix  Runs an offline scan and fix on the volume.
  /freeorphanedchains FAT/FAT32/exFAT only: Frees any orphaned cluster chains
                      instead of recovering their contents.
  /markclean          FAT/FAT32/exFAT only: Marks the volume clean if no
                      corruption was detected, even if /F was not specified.

The /I or /C switch reduces the amount of time required to run Chkdsk by
skipping certain checks of the volume.

[TanmayHembram]

22 minutes ago, legacy99 said:

Open Command Prompt in Administrator Mode and run the following command: sfc /scannow and see if it detects any errors. If not, then run the next: chkdsk /F /R and then reboot your PC and let it run. Here is all the commands and options available to you under the chkdsk section. 

 

C:\Windows\system32>help chkdsk
Checks a disk and displays a status report.

CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B] [/scan] [/spotfix]

  volume              Specifies the drive letter (followed by a colon),
                      mount point, or volume name.
  filename            FAT/FAT32 only: Specifies the files to check for
                      fragmentation.
  /F                  Fixes errors on the disk.
  /V                  On FAT/FAT32: Displays the full path and name of every
                      file on the disk.
                      On NTFS: Displays cleanup messages if any.
  /R                  Locates bad sectors and recovers readable information
                      (implies /F, when /scan not specified).
  /L:size             NTFS only:  Changes the log file size to the specified
                      number of kilobytes.  If size is not specified, displays
                      current size.
  /X                  Forces the volume to dismount first if necessary.
                      All opened handles to the volume would then be invalid
                      (implies /F).
  /I                  NTFS only: Performs a less vigorous check of index
                      entries.
  /C                  NTFS only: Skips checking of cycles within the folder
                      structure.
  /B                  NTFS only: Re-evaluates bad clusters on the volume
                      (implies /R)
  /scan               NTFS only: Runs a online scan on the volume
  /forceofflinefix    NTFS only: (Must be used with "/scan")
                      Bypass all online repair; all defects found
                      are queued for offline repair (i.e. "chkdsk /spotfix").
  /perf               NTFS only: (Must be used with "/scan")
                      Uses more system resources to complete a scan as fast as
                      possible. This may have a negative performance impact on
                      other tasks running on the system.
  /spotfix            NTFS only: Runs spot fixing on the volume
  /sdcleanup          NTFS only: Garbage collect unneeded security descriptor
                      data (implies /F).
  /offlinescanandfix  Runs an offline scan and fix on the volume.
  /freeorphanedchains FAT/FAT32/exFAT only: Frees any orphaned cluster chains
                      instead of recovering their contents.
  /markclean          FAT/FAT32/exFAT only: Marks the volume clean if no
                      corruption was detected, even if /F was not specified.

The /I or /C switch reduces the amount of time required to run Chkdsk by
skipping certain checks of the volume.

WHAT CAN I DO NEXT PLEASE TELL ME

[Skiiwee29]

9 hours ago, TanmayHembram said:

WHAT CAN I DO NEXT PLEASE TELL ME

Do the second half of the commands I gave you.

 

 

CHKDSK /F /R