Problem with AMD Firepro drivers

[Virgule]

Hello,
 
I have a problem with AMD Firepro drivers as shown in the following video :

 
My rig is the following :
MSI X99A SLI Plus
i7 5820k
32GB DDR4 Ram
AMD Firepro W4100 2GB
Adata SP550 240GB SSD
WD Caviar Black 1TB and 4TB HDD
OCZ ZX1000 PSU
 
I have the following version of drivers installed : 15.301.2601
 
Please help.

[Virgule]

Ok so I installed the beta drivers (16.6.1) and I switched my miniDP to DP cable to a miniDP to HDMI adapter and an HDMI cable and the problem is solved. Thanks for reading.

[Teddy07]

wow someone actually bought the firepro

[Virgule]

12 minutes ago, Teddy07 said:

wow someone actually bought the firepro

Yep, some of us use GPUs for other uses than gaming.

[Jalild2]

So, was is bad adapters or drivers?  how was the monitor connected initially?

[Virgule]

3 hours ago, Jalild2 said:

So, was is bad adapters or drivers?  how was the monitor connected initially?

The monitor was connected using its DP in (which I know works) by a DP to miniDP cable to the GPU. I replaced that cable with a DP to HDMI adapter + HDMI cable connected to the monitor's HDMI in and I also tried another GPU miniDP out. That change coincided with the installation of the more recent Beta drivers, so it could be either that were causing the problem. 

 

However, if you look at the problem closely you'll see that the distortion of the image occurs when I'm highlighting window borders and buttons. This would be really hard to explain by a faulty cable, monitor or GPU port. Therefore, I have to conclude that the problem was caused by the drivers or Windows 10 not recognizing the drivers correctly (or interfering).