Amplify vocals

[Himommies]

I have a video with a part with really quiet vocals any idea on how to boost it.Without messing up everything else

End Of Year.wav

[Volbet]

You could try to EQ the vocals higher, although, doing that will also highten the instruments in the same frequency range.

Human vocals will usually fall between 500 HZ and 1500 Hz. 

There will be a lot of trial and error involved. 

[Unimportant]

The procedure consists of applying a band-pass filter on the original audio with the passband set so only the vocals make it trough. (Or as close as possible). Finding the exact frequencies for your audio will require some trial and error.

 

The obtained signal is then mixed with the original again, effectively boosting that part of the signal.

 

Both operations can be done with audacity afaik.

[rhyseyness]

15 hours ago, Volbet said:

Human vocals will usually fall between 500 MHZ and 1500 MHz. 

Wooooow, slow down there.

You mean 500-1500Hz, not MHz.

No human can hear in the MHz range.

Other than that, your point stands and I'd give the same advice

[Volbet]

8 hours ago, rhyseyness said:

Wooooow, slow down there.

You mean 500-1500Hz, not MHz.

No human can hear in the MHz range.

Other than that, your point stands and I'd give the same advice

Don't tell me what I can and can't do.

Reality should never stand in the way of your dreams.

 

But yes, of course it's just Hz.

I don't know what hole my head was in when I wrote that.