Phanteks LED

[evenst3ph3n]

Hey I have the enthoo luxe and just purchased the phanteks 2m LED strip but found the adhesive strip falls off. I bought the 3m double sided mounting tape but this doesn't adhere to the back of the strip. Any suggestions. I was thinking of gluing the tape to the LED and cutting the tape into smaller pieces so its not in one long piece. What do you think?

[W-L]

5 hours ago, evenst3ph3n said:

Hey I have the enthoo luxe and just purchased the phanteks 2m LED strip but found the adhesive strip falls off. I bought the 3m double sided mounting tape but this doesn't adhere to the back of the strip. Any suggestions. I was thinking of gluing the tape to the LED and cutting the tape into smaller pieces so its not in one long piece. What do you think?

Welcome to the Forums!

 

The 3M mounting tape should work without any issues as long as you clean the back of the LED strip off very well, I usually recommend this stuff as it's resistant to heat also being an outdoor tape. As for shortening the length of the strip that's doable with a soldering iron and some lead wires. 

https://www.amazon.com/dp/B0083K36KA/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687742&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00004Z4BV&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=PKC778MZG3PGMHCWN98C

[evenst3ph3n]

On 13/06/2016 at 2:37 AM, W-L said:

Welcome to the Forums!

 

The 3M mounting tape should work without any issues as long as you clean the back of the LED strip off very well, I usually recommend this stuff as it's resistant to heat also being an outdoor tape. As for shortening the length of the strip that's doable with a soldering iron and some lead wires. 

https://www.amazon.com/dp/B0083K36KA/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687742&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00004Z4BV&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=PKC778MZG3PGMHCWN98C

Hi there thanks for the info. I was looking at shortening the tape into a few shorter bits  not the LED strip. I will give it a go and let you know.