New PC, black screen.

[Redjo]

Hello guys 10min ago i finished my ''PC building'', but when i boot it doesn't want to show anything on the screen. 

I plan taking it to service.... I checked twice if i did something wrong, but cant find anything. 

 

The only thing is that when i boot up x61 Kraken pump wont light, but everything is plugged in on its place. 

 

Spoiler

Spoiler

 

[007agentHP]

did you place thermal compound before applying the x61?
check if the switch on the PSU is on "I"

check your wiring connections 

 

[Redjo]

2 minutes ago, 007agentHP said:

did you place thermal compound before applying the x61?
check if the switch on the PSU is on "I"

check your wiring connections 

 

I didn't it has pre-applied paste, but it should still show image to monitor even doe additional paste is not applied. 

PSU fine. 

Connections fine.

[Aendy]

Try booting with 1 RAM stick, no ssd, no hdd, no optical drive etc. just the bare minimum to see something on the screen, You probably need the GPU for that, otherwise i would suggest taking it out as well.

If that boots, add piece by piece to it and see when it fails

[Redjo]

10 minutes ago, Aendy said:

Try booting with 1 RAM stick, no ssd, no hdd, no optical drive etc. just the bare minimum to see something on the screen, You probably need the GPU for that, otherwise i would suggest taking it out as well.

If that boots, add piece by piece to it and see when it fails

Nope still no picture.

[GoodBytes]

We have Troubleshooting section on the forum for troubleshooting questions.

 

Moved.

[Redjo]

14 minutes ago, GoodBytes said:

We have Troubleshooting section on the forum for Troubleshooting questions.

 

Moved.

Hello i am really sorry didn't pay attention where i post.

[Aendy]

Do all the Fans spin up on start and all the LEDs light up on the Mobo and GPU?

Unfortunately your mobo doesnt have an error code display, but maybe in the manual it states how you can identify the error codes (usually via an internal speaker attached to it)

Other than that: try removing the bios battery for some time and put it back (to reset the bios)

Try different RAM sticks in different bays

 

edit: also follow this thread: 

 

[Redjo]

10 hours ago, Aendy said:

Do all the Fans spin up on start and all the LEDs light up on the Mobo and GPU?

Unfortunately your mobo doesnt have an error code display, but maybe in the manual it states how you can identify the error codes (usually via an internal speaker attached to it)

Other than that: try removing the bios battery for some time and put it back (to reset the bios)

Try different RAM sticks in different bays

 

Hello all the fans are spinning, but not all the leds lighting up. 

Kraken x61 led is not lighting up even doe its working and everything is plugged. 

And not sure if NZXT case logo lighting or not. 

Spoiler

Spoiler

Spoiler

Spoiler

 

[Average Joe]

2 minutes ago, Redjo said:

Hello all the fans are spinning, but not all the leds lighting up. 

Kraken x61 led is not lighting up even doe its working and everything is plugged. 

And not sure if NZXT case logo lighting or not. 

  Hide contents

  Hide contents

  Hide contents

  Hide contents

 

What MOBO and CPU?

 

[Redjo]

1 minute ago, Average Joe said:

What MOBO and CPU?

 

Spoiler

Spoiler

 

[Average Joe]

So BIOS isn't the issue. Did you try to boot it outside the case? Do you have another PC to test the GPU?

[Redjo]

5 minutes ago, Average Joe said:

So BIOS isn't the issue. Did you try to boot it outside the case? Do you have another PC to test the GPU?

Nope i didnt boot outside, no other PC. 

[Average Joe]

1 minute ago, Redjo said:

Nope i didnt boot outside, no other PC. 

Too bad,

 

Well if the system would boot outside the case  that would indicate there is some shortage between the case and MOBO. If not then it could be any other component. The system should post even without cooling, but try to switch the pin to CPU_FAN2. Did you try different RAM sticks in different slots? Maybe use a different PCI slot for the GPU.