Jump to content

Hiho,

 

I own GA-Z87X OC FORCE motherboard and I managed to get my CPU to 5.1Ghz today. However... When I open CPU-Z the voltage is not lowering. It stays at 1.340V all the time.

Idle temps are 40-45 occasionally and temps are way too high (about 75-83 degrees), and temps when it comes to 4,8Ghz are the same. I know that Linus managed to OC 4790K to 4.8Ghz on 1.3V and he was only getting 65 degrees under full load, whereas I'm getting 75-83. What do I have to do to lower those temps? Cooler and thermal paste are top notch, I have H115i and Grizzly Kyronaut Thermal Paste.

 

CPU offset?

... ?

Here's an image of what my BIOS looks like more or less. 

gigabyte-z97x-soc-force-uefi-bios-1.jpg

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st LaptopMSI Titan HX18 Dragon EditionRTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to comment
https://linustechtips.com/topic/593489-cpu-overclocking-problem-need-bios-help/
Share on other sites

Link to post
Share on other sites

2 minutes ago, FilipSebik said:

You need to change cpu clock ratio, set cpu base clock to 100mhz and then change cpu core voltage

I did exactly that, and yet something is wrong.

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st LaptopMSI Titan HX18 Dragon EditionRTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to post
Share on other sites

1 minute ago, basicallysky said:

well not all chips are made equal and yours might overclock differently so you can't expect to get the same results as linus 

I achieve 4.8Ghz with less voltage than Linus. Lower voltage = lower temps. I have a better cooler also, and CPU cooler than the one from the video. Also, my chip is really good, therefore something is not right.

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st LaptopMSI Titan HX18 Dragon EditionRTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to post
Share on other sites

1 minute ago, basicallysky said:

did you start with the factory settings or try to get the same one as linus right off the bat

 

I restarted and tested stock, been getting just 50 degrees in a quite hot room under full load.

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st LaptopMSI Titan HX18 Dragon EditionRTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to post
Share on other sites

1 hour ago, basicallysky said:

well the 4790k is i very hot running chip but you are right maybe there is something wrong with your cooler 

 

 

4.6Ghz runs at 60 degrees so yeah...

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st LaptopMSI Titan HX18 Dragon EditionRTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to post
Share on other sites

37 minutes ago, basicallysky said:

so is your cooler working or did it not make good contact and does that cooler have a sticker to protect it from scratches in shipping that was not removed 

It does excellent work. I bought it less than a month ago. I just explained that the CPU crams same amount of voltage to the CPU and I simply asked how to change that... Asking about my cooler isn't even related to the question.

Main PC:

CPU: Intel Core i9 14900KS SP 109 (125P-79E) (6.1Ghz P-Cores 4.8Ghz E-cores) MC SP 88

CPU Voltage: LLC6 1.43V

Cooled by: Supercool Direct Die 14th gen full nickel

Motherboard: Z790 ASUS Maximus Apex Encore

RAM: GSkill TridentZ 2x24GB DDR5 8800Mhz Watercooled

GPU: RTX 5090 Palit OC with Alphacool Core Waterblock

Case: TT P3

Storage: 4x 2TB Sarbent Rocket Plus Gen 4.0 NVMe, 1x External 2TB Seagate Barracuda (Backup)

PSU: Corsair AX1600i with custom black and red cables with 2x Corsair 5V+ Load Balancer

Display: Samsung Oddysey G9 57" 240Hz Ver. 7680x2160 and

2x ASUS XG17AHP 240hz 17"

Fan Controllers:  6x AquaComputer Octo

Cooling: Three Custom Loops:

1st Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for GPU only cooling with 2x Koolance QDC3, red coolant

2nd Loop: 5x 480mm XE CoolStream radiators with 1x Revo D5 RGB pump and 1x Rajintek Antila D5 Evo RGB pump for CPU only cooling with 2x Koolance QDC3, purple coolant

3x 360mm PE EKWB CoolStream 

3rd Loop: 1x 240mm PXE CoolStream radiator with 1x EKWB Revo D5 pump (RAM ONLY) - Back of the case

 

2nd Main PC is same as above, except Display is Philips Evnia 49" 5120x1440 240hz QD-OLED, 48GB 8400Mhz RAM, 8TB NVMe

 

1st LaptopMSI Titan HX18 Dragon EditionRTX 5090 175W, Core Ultra 285HX,  128GB of RAM @5600Mhz / 96GB @6400Mhz

8TB of NVMe - GPU and CPU with LM on, Llano V12

2nd Laptop: MSI Raider 18HX, RTX 5090 175W, 9955HX3D, 128GB DDR5 @5600Mhz, 8TB NVMe, CPU and GPU LM on, Llano V12

3rd Laptop: MSI Titan 18HX, RTX 4090 175W, 14900HX, 224GB DDR5 @3600Mhz, 8TB NVMe

 

HTPC: 

CPU: Intel Core i9 14900K (SP99 P111 E76), CPU Voltage: 1.33V, Cooled by: Supercool Direct Die 12th gen full nickel, Motherboard: Z790 Apex

RAM: GSkill TridentZ 2x24GB DDR5 8000Mhz CL40, GPU: RTX 5090 Palit Gamerock with Alphacool Waterblock,  Case: Corsair 6500D, Storage: 3x2TB PM9A1 Samsung NVMe Gen 4

WiFi: Wifi 6E Built in, PSU: AX1600i Corsair Titanium, Display: Philips Evnia 49" 240Hz OLED, Fan Controllers:  1x DH-10 DeepCool and Deepcool RGB hub, Loop: 2x 360mm XE CoolStream radiator, 1x 360mm PE Coolstream Radiator, 1x 240mm XE CoolStream Radiator, Revo D5 EKWB Pump, 19x Corsair 120ML RED LED fans 2000RPM

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×