PETG Bending

[littlepigboy5]

I need to buy that rubber tube that you put inside PETG or acrylic when you bend it, but I don't know what it's called so I can't find it.

[cryon1cang3l]

That stuff is called bending inserts:
http://www.primochill.com/product-category/primochill/tubing/rigid/bending-insert/

There are also some other tools, but that should be enough. 

[littlepigboy5]

34 minutes ago, cryon1cang3l said:

That stuff is called bending inserts:
http://www.primochill.com/product-category/primochill/tubing/rigid/bending-insert/

There are also some other tools, but that should be enough. 

can you link me some for 12mm/16mm PETG? beause 3/8 inches is about .09 inches smaller than the ID of the tube im using, or is that ok

[Lurick]

This should do the trick:

https://www.ekwb.com/shop/ek-hd-tube-d-i-y-kit-10and12mm

[cryon1cang3l]

2 minutes ago, littlepigboy5 said:

can you link me some for 12mm/16mm PETG? beause 3/8 inches is about .09 inches smaller than the ID of the tube im using, or is that ok

https://www.ekwb.com/shop/ek-hd-tube-d-i-y-kit-10and12mm

Thats a small kit for 10mm and 12mm inner diameter tubes. Other companies should have it too. Look for that in your area, Caseking offers that in EU just like EKWB.

 

[littlepigboy5]

14 minutes ago, cryon1cang3l said:

https://www.ekwb.com/shop/ek-hd-tube-d-i-y-kit-10and12mm

Thats a small kit for 10mm and 12mm inner diameter tubes. Other companies should have it too. Look for that in your area, Caseking offers that in EU just like EKWB.

 

I don't want to buy a kit though, i have everything else, isn't there just 12mm silicone tubing?

[cryon1cang3l]

1 minute ago, littlepigboy5 said:

I don't want to buy a kit though, i have everything else, isn't there just 12mm silicone tubing?

Well sure there is. But i have no idea in what part of the world you live and what is avaliable over there. You would have found it in that time already, but ok, here we go:

http://www.aquatuning.de/water-cooling/tools/acrylic-tube-tools/19496/alphacool-silicon-bending-insert-100cm-fuer-id-1/2-/-12mm-schlauch-blau?c=20875

http://www.aquatuning.de/water-cooling/tools/acrylic-tube-tools/17128/monsoon-silicon-bending-insert-red-fuer-id-1/2-/-12mm-schlauch?c=20875

 

And check other brands like Mayhems, XSPC blah, they should have it too. And your local hardware store/construction store should have something useful too.