Jump to content

So I've had this installed in my system now for over a week, and it just puzzles me how the performance os actually WORSE than my Corsair H100i GTX. The idle temps bounce all over the place from between 25c and 40c, and quickly escalates when under load to 55c. When using the Corsair, it was a stable idle temp at a nice 25-30c and wouldn't jump all over the place, and under load it would be a slow climb to higher temps. I just do not get whats wrong at all...How tight am i suppose to screw the cpu block down? Until they're tight? They use springs under the screws.. Is there something else i might've done wrong?

 

I am aware that my pump is facing the wrong way, but it wont fit anywhere else in the Corsair 400c, and it doesnt look that bad (the white sticker has already been removed, no worries)

IMG_20160420_190212.jpg

IMG_20160420_190254.jpg

My Build: 

Processor: Intel Core i5 4590 @ 3.3ghz

Motherboard: ASRock Z97 Fatal1ty Killer

Graphics: Sapphite Nitro+ OC RX 480 8GB

Memory: 8gb Kingston HyperX Fury 1866mhz RAM (2x4gb)

Cooling: Swiftech H220-X2

Case: NZXT S340 Elite Tempered Glass

Power Supply: EVGA GS650 650W

Lighting: NZXT Hue+

Extensions: Phanteks Black/Red Extensions

Link to comment
https://linustechtips.com/topic/586525-swiftech-h220-x2-issues/
Share on other sites

Link to post
Share on other sites

2 minutes ago, FilipSebik said:

Bad mount? Try remounting it

Yea i tried that already, even reapplied thermal paste too :c

My Build: 

Processor: Intel Core i5 4590 @ 3.3ghz

Motherboard: ASRock Z97 Fatal1ty Killer

Graphics: Sapphite Nitro+ OC RX 480 8GB

Memory: 8gb Kingston HyperX Fury 1866mhz RAM (2x4gb)

Cooling: Swiftech H220-X2

Case: NZXT S340 Elite Tempered Glass

Power Supply: EVGA GS650 650W

Lighting: NZXT Hue+

Extensions: Phanteks Black/Red Extensions

Link to comment
https://linustechtips.com/topic/586525-swiftech-h220-x2-issues/#findComment-7643041
Share on other sites

Link to post
Share on other sites

Just now, FilipSebik said:

Stupid question but is your pump plugged in?

completely understandable, but yes its plugged in haha

My Build: 

Processor: Intel Core i5 4590 @ 3.3ghz

Motherboard: ASRock Z97 Fatal1ty Killer

Graphics: Sapphite Nitro+ OC RX 480 8GB

Memory: 8gb Kingston HyperX Fury 1866mhz RAM (2x4gb)

Cooling: Swiftech H220-X2

Case: NZXT S340 Elite Tempered Glass

Power Supply: EVGA GS650 650W

Lighting: NZXT Hue+

Extensions: Phanteks Black/Red Extensions

Link to comment
https://linustechtips.com/topic/586525-swiftech-h220-x2-issues/#findComment-7643046
Share on other sites

Link to post
Share on other sites

Just now, FilipSebik said:

Try making it run at full speed to hear if there are any bubbles in pump that may be restricting the flow of the pump

Now sure how i would do that exactly. The pump is connected to the power supply. The only thing i have control of is the fans (AFAIK).

My Build: 

Processor: Intel Core i5 4590 @ 3.3ghz

Motherboard: ASRock Z97 Fatal1ty Killer

Graphics: Sapphite Nitro+ OC RX 480 8GB

Memory: 8gb Kingston HyperX Fury 1866mhz RAM (2x4gb)

Cooling: Swiftech H220-X2

Case: NZXT S340 Elite Tempered Glass

Power Supply: EVGA GS650 650W

Lighting: NZXT Hue+

Extensions: Phanteks Black/Red Extensions

Link to comment
https://linustechtips.com/topic/586525-swiftech-h220-x2-issues/#findComment-7643055
Share on other sites

Link to post
Share on other sites

I've got just a cheap phone so potato quality, but i use my paint skills.

IMG_20160424_063446.jpg

My Build: 

Processor: Intel Core i5 4590 @ 3.3ghz

Motherboard: ASRock Z97 Fatal1ty Killer

Graphics: Sapphite Nitro+ OC RX 480 8GB

Memory: 8gb Kingston HyperX Fury 1866mhz RAM (2x4gb)

Cooling: Swiftech H220-X2

Case: NZXT S340 Elite Tempered Glass

Power Supply: EVGA GS650 650W

Lighting: NZXT Hue+

Extensions: Phanteks Black/Red Extensions

Link to comment
https://linustechtips.com/topic/586525-swiftech-h220-x2-issues/#findComment-7643085
Share on other sites

Link to post
Share on other sites

Just now, FilipSebik said:

I don't have a clue

Alright well thanks anyway. Im sure i just missed something somewhere

If anyone else has any input that'd be great ;D

My Build: 

Processor: Intel Core i5 4590 @ 3.3ghz

Motherboard: ASRock Z97 Fatal1ty Killer

Graphics: Sapphite Nitro+ OC RX 480 8GB

Memory: 8gb Kingston HyperX Fury 1866mhz RAM (2x4gb)

Cooling: Swiftech H220-X2

Case: NZXT S340 Elite Tempered Glass

Power Supply: EVGA GS650 650W

Lighting: NZXT Hue+

Extensions: Phanteks Black/Red Extensions

Link to comment
https://linustechtips.com/topic/586525-swiftech-h220-x2-issues/#findComment-7643103
Share on other sites

Link to post
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×