tubing help does this fit ?

[loony979]

ok so i got a kit - tubing info says:

PrimoChill PrimoFlex Advanced LRT 10/13mm

 

the 1 i think may be the same is this am i right ? :

PrimoChill PrimoFlex Advanced LRT Tubing Clear 1/2ID 3/4OD

[Groundedbeef]

1/2 inch is 12.7mm

3/4 inch is 19.05mm

 

 

[loony979]

so im guessing you are saying this is right and get it ?>

Sorry i hate imperial blend with metric stuff it bugs me at times. xd.

[Groundedbeef]

2 minutes ago, loony979 said:

so im guessing you are saying this is right and get it ?>

Sorry i hate imperial blend with metric stuff it bugs me at times. xd.

Please use quotes so that i can see that you have responded.

 

No dont get it, wont fit, one is metric other one is imperial mesurements.

[loony979]

1 minute ago, Groundedbeef said:

Please use quotes so that i can see that you have responded.

 

No dont get it, wont fit, one is metric other one is imperial mesurements.

EK KIT X240 Water Cooling Kit - I got it from PCCG link . https://www.pccasegear.com/products/28991/ek-kit-x240-water-cooling-kit

[Groundedbeef]

 

2 minutes ago, loony979 said:

EK KIT X240 Water Cooling Kit - I got it from PCCG link . https://www.pccasegear.com/products/28991/ek-kit-x240-water-cooling-kit

Im not sure what you want, everything seems to be included in that kit, are you looking for more tubing?

[loony979]

Just now, Groundedbeef said:

 

Im not sure what you want, everything seems to be included in that kit, are you looking for more tubing?

yeah im getting more stuff im ok for fittings i understand that it's just more tubing to redo the loop. it all works but i want to change it up .

so yes i need more tubing for it. But thanks for the help as well.

[Groundedbeef]

5 minutes ago, loony979 said:

-SNIP-

your welcome

[loony979]

2 minutes ago, Groundedbeef said:

 

ok if i was to say my fittings are G (1/4) 10/13  what tubing would i need. thats all i need to know.

then i can write that down ,then im golden.

[Groundedbeef]

you would need 10/13mm tubing

[loony979]

ok i found what i needed as it's on the fittings page when i get my fittings silly me.

When i look @ this EK ACF 10/13mm Compression Fitting Nickel in PCCG

it says supported tube is EXACTLY : 3/8" /1/2" OD (roughly 10/13mm ID/OD)

so ill be getting this :PrimoChill PrimoFlex Advanced LRT Tubing Clear 3/8ID 1/2OD 3m