Kraken G10 Post-Installation Issues

[Kilovice]

Ok, so to start, here are a few specs:

CPU: i7 6700k w/ Corsair h100i

MOBO: Asus z170-Deluxe

GPU: EVGA GTX Titan 6Gb w/ NZXT Kraken x41, NZXT Kraken G10

 

This is all post installation of the Kraken...

So with that out of the way, lets troubleshoot! I run 3 displays, 2 1080p (Acer G6) and 1 1440p (BenQ). The Titan has the following ports: DVI-I, DVI-D, Display Port, and HDMI. Prior to installation, everything worked, however, afterwards, display port and DVI-D do not work. I had a theory it was either the monitor or the cable so I tested both on the working port and they operated fine. All idle temps are relatively low (usually around 29C-32C). I did load Ubuntu which uses generic drivers (on a fresh install, which is what mine was) and the third display on DVI-D still didn't work.

 

Edit:

Basically, post installation:

- nVidia Drivers: 361.75

- OS: Win10

- HDMI: Works

- DVI-I: Works

- DVI-D: Doesn't Work

- Display Port: Doesn't Work

 

Edit 2:

Worked with nVidia Drivers for a bit . . .

- nVidia Drivers: 361.75

- OS: Win10

- HDMI: Works

- DVI-I: Works

- DVI-D Doesn't Work

- Display Port: Works