Custom watercooling compatibility help

[TheIcedCanadian]

Hi,

I was putting together a custom watercooling upgrade list for this build - http://au.pcpartpicker.com/p/K4MwRB

However while I was browsing through the tubing for the build (hard tubing), I wasn't able to find anything that fit the G1/4 fittings that I had picked - I need to know if I need to change the fittings or if I just wasn't looking hard enough for the tubing (kinda new to this stuff). Also if you could check everything is compatible and works with the above system that would be great. All prices in AUD and watercooling is very strongly prefered to come from PCCaseGear.

Here is the list: https://www.pccasegear.com/index.php?main_page=wish_lists&wlcId=538646&action=wish_lists

Thanks for any help!

[JebKerman]

err. those look like soft tubing fittings which is why you probably haven't found anything.

 

you need something like these:

https://www.pccasegear.com/products/29096/ek-hdc-fitting-16mm-g1-4-black

https://www.pccasegear.com/products/29905/monsoon-hl-16-13mm-compression-fitting-matte-black

 

then a 16mm outer diameter tubing, (inner diameter doesn't matter)

[TheIcedCanadian]

err. those look like soft tubing fittings which is why you probably haven't found anything.

 

you need something like these:

https://www.pccasegear.com/products/29096/ek-hdc-fitting-16mm-g1-4-black

https://www.pccasegear.com/products/29905/monsoon-hl-16-13mm-compression-fitting-matte-black

Oh ok thanks - as I said still learning haha - kind seems dumb that I didn't read into that now - thanks for the quick reply