Gigabyte 9600 GT issue

[Ado]

Hi for everyone. First of all, sorry for my BAD english
Second, i have a big problem with my graphics card... when i'm trying to load gpu with some bench tests, graphics card always squeaking like a pig. And after couple seconds, screen goes black for 2 sec, and it turns on, and pops up message saying that "nvidia drivers stopped working and has recovered". I have "INTER-TECH IT-SL500" PSU... There is no PCI-E 6 pin power, so i installed 6 pin connector by myself from molex and sata pins. 2 black x 1 yellow,  2 yellow and 1 black. I also tried to replace RAM sticks. When GPU on benchmark, all pc fans slows down. I tried to power graphics card with other PSU. So my pc was running with 2 psu, but nothing... same problem.

[KemoKa]

Because you're taxing the PSU waaaaay too much and it just doesn't want to do it. the drivers drop out, the GPU stops drawing power and goes to idle while the drivers reset.

Get a proper power supply. NEVER use Molex and SATA power to power a graphics card on a crappy PSU.

 

Guys, look at this thing:

 

If you're like us, just this picture should be enough to send you running the other way screaming.

 

@Ado Follow your posts, man

[Belgarathian]

Looks like a scrapyard wars find... 

 

But yes, you need to get a new PSU... Although the fact you're trying to diagnose a 9600GT tells me that your budget is slim. 

[Ado]

Yes, you are right. Everything from scrap. And i'm trying to fix everything what's wrong Thank you guys for answers