Ado

I have tried my R9 290x in AM3 mb with PCIe-3 slot and card worked just fine. After that, i tried to boot this card with two MSI and Gigabyte 1155 socket mb with PCI-E 2.0 and nothing... For now i'm using GA-H61MA-D2V mb with latest bios... but that card won't work... damn... maybe this card is faulty?

Fractal Integra M 750W

I will try with better PSU, thanks for now

One rail, 54 amp's.

Hi all, first of all, sorry for my BAD english, i hope u will understand what i am saying. Second, i have a big problem with my graphics card. I installed R9 290X in to Gigabyte GA-G31m-es2l rev 1.1 mb and i have no video signal at all. My PSU Chieftec GPS-700AB8. Before i installed that card in my mb, i tried this card with EVGA nforce 680i sli mb with the same PSU, and it works fine. Maybe mb is to old, to boot AMD card? BIOS version F10. Now i'm using HD 7850...

I asked for one technician about K5 PRO.. " K5 PRO can repalce all kinds of thermal pads up to 3.5mm thick. It is not electrically conductve so it doesn't cause any problems and can be cleaned easily with dry paper. " I thinking about that paste, because i don't know GTX 280 the thickness of the thermal pads

But viscous thermal paste desinged for thermal pad replacement. Why is this a bad idea to use it for VRM's and mem chips?

K5 PRO viscous thermal paste for graphics card thermal pad replacement. Is this a good idea? sorry for my bad english...

Core temp 70 degree. VRM temp ~75 degree. With performance everything looks good and then pc restarts. PSU - Modecom MC 530 Carbon. 530W with original PCI-E 6 pin connector and 8 pin adapter/connector (From molex to PCI-E 8 pin). 12V1 - 17A and 12V2 - 17A.

Hi, i have a problem with Nvidia GTX 280. When i testing graphics card with "FurMark" and when Core temp reaches 71 degree, pc immediately reboots. It is normal?

I changed thermal paste. With fan speed everything looks good. I looked around MB and temps looks normal... Heatsink is cold like ice

Hi, i have a little problem with PC... CPU idle temp 35-36 celsius. Bios version F2. I decided update Bios to F4. After update CPU idles temp 45-49 celsius. Stress test shows 78 celsius after 20 secs... Before update was 60 degree... of course, before, after update and downgrade i loaded default bios settings. Now i'am with F2 BIOS nad everything looks good... MB - GIGABYTE GA-EP35-DS3R (ver2.1) CPU - Q6600 @3.2GHz Cooler - OCZ Vendetta 2

Yes, you are right. Everything from scrap. And i'm trying to fix everything what's wrong Thank you guys for answers

Hi for everyone. First of all, sorry for my BAD english Second, i have a big problem with my graphics card... when i'm trying to load gpu with some bench tests, graphics card always squeaking like a pig. And after couple seconds, screen goes black for 2 sec, and it turns on, and pops up message saying that "nvidia drivers stopped working and has recovered". I have "INTER-TECH IT-SL500" PSU... There is no PCI-E 6 pin power, so i installed 6 pin connector by myself from molex and sata pins. 2 black x 1 yellow, 2 yellow and 1 black. I also tried to replace RAM sticks. When GPU on benchmark, all pc fans slows down. I tried to power graphics card with other PSU. So my pc was running with 2 psu, but nothing... same problem.