Asus motherboard

[Devdyuk]

I have a asus rampage 5 movo and I tried upgrading the bios and it said succeed and everything but than it said bios is updating do not turn off computer or restart what do I do I tried clearing the closing and all that but it dident work

[runit3]

I have a asus rampage 5 movo and I tried upgrading the bios and it said succeed and everything but than it said bios is updating do not turn off computer or restart what do I do I tried clearing the closing and all that but it dident work

http://www.asus.com/microsite/2014/MB/New_4th_gen_Intel_processor_compatibility/

 

Follow that. It applies to all boards with USB BIOS Flashback as a feature. Most important thing is a FAT32 formatted USB.

[Devdyuk]

http://www.asus.com/microsite/2014/MB/New_4th_gen_Intel_processor_compatibility/

 

Follow that. It applies to all boards with USB BIOS Flashback as a feature. Most important thing is a FAT32 formatted USB.

Thanks so much in that link it's says connect power but just the 24 pin right and can I have ram and club installed like can I leave my pc in the case how it is and just do this

[runit3]

Thanks so much in that link it's says connect power but just the 24 pin right and can I have ram and club installed like can I leave my pc in the case how it is and just do this

You can ignore that portion. They probably wrote that in the midst of the Devil's Canyon release when the 8 series boards couldn't post without the BIOS update. As a side note, you can use BIOS Flashback with only the CPU and PSU installed, it's not a requirement.

[Devdyuk]

You can ignore that portion. They probably wrote that in the midst of the Devil's Canyon release when the 8 series boards couldn't post without the BIOS update. As a side note, you can use BIOS Flashback with only the CPU and PSU installed, it's not a requirement.

can I flashback with GPS and ram

[runit3]

can I flashback with GPS and ram

You can flashback with every component installed. Power off, insert the USB into the labeled port on the MOBO, hold down the button until it flashes, wait until the light turns off, power up the computer.

[Devdyuk]

I put the USB with the correct file name in computer USB and I turned off computer but it is plugged in the wall and the system can be turned on if I press on but I press the rog button for 3 sec no lights flash

[Devdyuk]

You can flashback with every component installed. Power off, insert the USB into the labeled port on the MOBO, hold down the button until it flashes, wait until the light turns off, power up the computer.

[Devdyuk]

All I dad was format the USB to fat 32 download the file and renamed it for my asus ram page 5 which was like r5e.cap

[runit3]

All I dad was format the USB to fat 32 download the file and renamed it for my asus ram page 5 which was like r5e.cap

You need to use the converter utility that should be within the "BIOS Utilities" subset here: https://www.asus.com/us/Motherboards/RAMPAGE_V_EXTREME/HelpDesk_Download/

 

Bios Renamer for USB BIOS Flashback and Crashfree BIOS 2

1.Put Bios file and Bios renamer in same folder

2.Execute the Utility

3.Use new Bios file for USB BIOS Flashback.