No POST at all

[Philz69]

Hey guys! So here is what is going o,n my system powers up, LEDs are working, fans are working, but my motherboard does not post. I know that the post code reader is working because it flashes for a very brief time when i power on the system and was working before all of this started The power and reset switch on the motherboard stopped working at some point during troubleshoot too, but i can still power on the mobo using them, just not reset, very strange.Here is what i tried:

- Clear CMOS

- Try with backup bios

- unplug everything but CPU and mobo

- Two different, known working RAM sticks ( both of wich were in this computer at some point, so compatible )

-Two different CPUs

-Checked socket for bent pins

-Two different power supply, known working

Is there something i missed? I am pretty sure my mobo is dead at this point...

[babadoctor]

?

[Textosterone]

u where cut off sir

[CydiaDash]

Nice. Good information

[Philz69]

Is that better?

[TEC]

I think it is the GPU. Because you know. GPU's. _{Nvm he changed it.}

[Textosterone]

whats the post code?

[Philz69]

Its not posting at all! Like in no post code at all

[Textosterone]

Its not posting at all! Like in no post code at all

u said it flashes tho

[Valkyrie Lenneth]

i had a dead mobo before, no matter what i swapped out... no post... swapped the mobo... (◑‿◐) gg

[Valkyrie Lenneth]

u said it flashes tho

so did my dead out of the box mobo... coz it shows signs of life doesnt mean it is alive (◑‿◐)

[Philz69]

It flashes as a 0 without the top left bar

[Textosterone]

yeah i would return it and get a new one

[Philz69]

Except its second hand, and probably out of guanrantee and its a G1 sniper 5, im going to have a hard fucking time finding another one

[AManWithPlan]

Here's a few silly things to check. Did you seat your 24pin connector all the way into the mother board? Did you put in your CPU 4/8 pin connector?

 

Lastly, can you set up a test bench so there is no chance you are shorting the board while inside your case. Just put the board on a table and run it that way.

 

It seems you checked everything else and the board is dead.

[Philz69]

Not only did i try reseating, i tried different cables when i changed psu , i'll go ahead and try it on a cardboard box, i really hope that'll work

[Philz69]

Ok, MOBO CONFIRMED DEAD, confirms what i though, thanks anyway!