Jump to content

Hello,

 

I am wanting to use a 10G SFP+ ethernet solution for my computers and my production servers. Here is the 10G SFP+ card I am wanting...

 

http://www.ebay.com/itm/Mellanox-ConnectX-2-Single-Port-SFP-10GBE-Network-Card-MNPA19-XTR-/271934252546?pt=LH_DefaultDomain_0&hash=item3f508b6602

 

If I buy two of these, can I just connect the two together, plus some daisychaining, and have a 10GBe link to my server? I am not familiar with SFP+ and fiber networking yet. Is there any additional things I would need other than a 10G switch?

 

Please help!

 

-Cam

Link to comment
https://linustechtips.com/topic/423476-10gbe-network-setup-questions-please-help/
Share on other sites

Link to post
Share on other sites

Hello,

 

I am wanting to use a 10G SFP+ ethernet solution for my computers and my production servers. Here is the 10G SFP+ card I am wanting...

 

http://www.ebay.com/itm/Mellanox-ConnectX-2-Single-Port-SFP-10GBE-Network-Card-MNPA19-XTR-/271934252546?pt=LH_DefaultDomain_0&hash=item3f508b6602

 

If I buy two of these, can I just connect the two together, plus some daisychaining, and have a 10GBe link to my server? I am not familiar with SFP+ and fiber networking yet. Is there any additional things I would need other than a 10G switch?

 

Please help!

 

-Cam

 

If you're wanting to link multiple things together via SFP+, you're going to need a switch for it.

 

But if you got two of them and connect them directly, I'd assume it'd work.

Specs: CPU - Intel i7 8700K @ 5GHz | GPU - Gigabyte GTX 970 G1 Gaming | Motherboard - ASUS Strix Z370-G WIFI AC | RAM - XPG Gammix DDR4-3000MHz 32GB (2x16GB) | Main Drive - Samsung 850 Evo 500GB M.2 | Other Drives - 7TB/3 Drives | CPU Cooler - Corsair H100i Pro | Case - Fractal Design Define C Mini TG | Power Supply - EVGA G3 850W

Link to post
Share on other sites

If you're wanting to link multiple things together via SFP+, you're going to need a switch for it.

 

But if you got two of them and connect them directly, I'd assume it'd work.

 

I need to make sure they work directly. There is only one server I need 10G on. The rest run off of a gigabit network. Linus did that when they first went 10G, just hook the two up directly with some daisychaining. Any YouTube videos on that?

 

Thanks

Link to post
Share on other sites

I need to make sure they work directly. There is only one server I need 10G on. The rest run off of a gigabit network. Linus did that when they first went 10G, just hook the two up directly with some daisychaining. Any YouTube videos on that?

 

Thanks

 

There was one video. Here it is www.youtube.com/watch?v=Bu6jlA7hPj8

Human intelligence decreases with increasing proximity to oncoming traffic.

 

Link to post
Share on other sites

  • 3 weeks later...

Dont get into high end server stuff unless you know what you are doing.

 

My production server has 4 Kingston 240GB Solid State drives lol. I don't think a regular gigabit network will be enough. 10 gigabit is more like it, as each drive is capable of 500+ MegaBYTES per second. :)

Link to post
Share on other sites

My production server has 4 Kingston 240GB Solid State drives lol. I don't think a regular gigabit network will be enough. 10 gigabit is more like it, as each drive is capable of 500+ MegaBYTES per second. :)

My granddad has a NAS with some WD Blacks in there, they are capable of doing more then a 100mb/s. Now explain to me what is on your "production server" and what you need this 10gig connection for.

If you tell a big enough lie and tell it frequently enough it will be believed.

-Adolf Hitler 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×