Jump to content

Hello Guys,

 

I need help quick.. My pc crashed while i was playing GTA V.. so i turned the pc off and then i started it. But then i could hear the fans go to 100% and my Corsair hydro H80I GT's pump led didnt pop up aswell.. i could get into bios but when i tried to load windows it just crashes, shows blue screen for 5 seconds and then its dead.. i was able to go into recovery but that didnt do anything, i reseted the bios, popped out the cmos battery, tried ram cards, but nothing works...  I did oc my cpu, but now without the oc it wont boot either..

 

My PC specs:

 

Mobo: Asrock fm2a88m extreme4+

CPU: AMD Athlon A4 860k

PSU: Corsair VS550

GPU: Gigabyte GTX 960 4gb

Cpu cooler: Corsair hydro H80I GT

Ram: 2x Corsair value 4gb sticks.

 

Please help..

 

Regards,

Matthijs

Link to comment
https://linustechtips.com/topic/412393-need-help-fast/
Share on other sites

Link to post
Share on other sites

mattie301

 

What is your temperatures??hat sounds possibly like a issue, also, try running the cooler outside the case for a minute and see if there is any leaks.

 

Check temps in bios, AND JUST PLEASE, do a leak test outside the case with the cooler, by just plugging in the bump, and just run the pump outside with the radiator.. Just leak test it D:

 

Well test it outside of ur case as long as u has another cooler, if you don't, leak test inside on the cpu D:

MOTHERBOARD: some Asus motherboard CPU: I3-4130 GPU: Gigabyte(?) GT-1030 RAM: 8GB G.SKILL SNIPER 1600MHZ RAM + 4GB AMD ram PSU: Corsair CX450 CASE: Corsair Spec-03 OS: Win 10 64 bit Keyboard: Logitech G510s Mouse: Corsair G300s Camera: Canon EOS Rebel T5
I like outdoor warning sirens. Ask me anything about them.

 

 

Link to comment
https://linustechtips.com/topic/412393-need-help-fast/#findComment-5550592
Share on other sites

Link to post
Share on other sites

Okay i leak tested the pump, no leaks visable and no liquid came out, the cpu is on a solid 35 degrees celcius when in bios the mobo is a solid 29 degrees celcius.. so the cooling works just fine, the led on the pump wont show but when i put it in the mobo without processor and listen to it the pump is running..

Link to comment
https://linustechtips.com/topic/412393-need-help-fast/#findComment-5555826
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×