USB Boot and Windows Disconnect Errors

iDeJayDzn · July 4, 2015

So i've had a lot of issues with my PC lately as some of you may have seen. I seem to have slowly cleared most of them up. However there's a small issue remaining.

My BIOS still displays the usual boot error codes (A2, B4, 9A, 90, A0).

I'm going to rip all my PC apart and insert new cables in September as it is so if removing everything and changing SATA ports for my HDD/SSD solves it then i don't know. However i dont think thats the issue.

During the Windows boot up sequence. The Windows logo gets half way through loading then my keyboard and mouse LEDs cut out and then turn back on once Windows Desktop loads.

The same happens at BIOS. Once each display code has gone passed then the LEDs will start to appear on the devices. So im guessing either my boards USB drivers have an error or it doesnt like my keyboard/mouse, but i dont see why.

Anybody any ideas on how to sort this sort of issue? There's literally nothing else i can think of to do. I have Googled the issue and tried most of everything i could find but nothings worked. But like i said, the only thing left would be to remove everything and reinsert. However it seems more like a Keyboard/Mouse USB error.... I DONT KNOW, HELP

0x1e · July 4, 2015

It doesn't effect the Keyboard / mouse though once it's complete?

The keyboard / mouse and other things being disconnected during booting is normal. When the logo flashes that's the drivers being loaded.

If your screen shows you your resolution then you might see the logo being 800 * 600 then after the flash going to 1920 * 1080.

It's the same with the USB's.

iDeJayDzn · July 4, 2015

It doesn't effect the Keyboard / mouse though once it's complete?

The keyboard / mouse and other things being disconnected during booting is normal. When the logo flashes that's the drivers being loaded.

If your screen shows you your resolution then you might see the logo being 800 * 600 then after the flash going to 1920 * 1080.

It's the same with the USB's.

Sometimes the mouse stays disconnected and have to reboot. Although that is a rare occurance. My main issue is the BIOS loading issues as that seems to take more time than actually booting up from bios to desktop. And i'd also like to boot without a load of errors just for piece of mind.

0x1e · July 4, 2015

Sometimes the mouse stays disconnected and have to reboot. Although that is a rare occurance. My main issue is the BIOS loading issues as that seems to take more time than actually booting up from bios to desktop. And i'd also like to boot without a load of errors just for piece of mind.

If your computer crashes in Bios then it could be two things.

A rubbish bios flash, or just a rubbish bios or,

hardware incompatibility. Normally RAM.

iDeJayDzn · July 4, 2015

If your computer crashes in Bios then it could be two things.

A rubbish bios flash, or just a rubbish bios or,

hardware incompatibility. Normally RAM.

It doesnt crash in bios. It used to. Somehow that issue solved itself. However the USB errors have always been there since my first post. I'm guessing it's the motherboard being a dick. Thinking of getting another at some point but if i can fix the issue then what would be the point. My only real issue with the one i have is that the BIOS is pretty shit to navigate.