Jump to content

So I'm following this guide (http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-2.htm#step1). I got to that particular step, but after restarting it just goes back to going through the process of accepting terms, installing on a drive, etc.

 

Then I was told from a tech friend that I should remove the USB when the computer was restarting, but now the monitor isn't getting any video from neither the video card or motherboard.

 

Here is my current part list:

http://pcpartpicker.com/user/4ks_/saved/JTFrxr

Not on there includes a 500gb Western Digital Caviar Blue and an optical drive both salvaged from an old computer.

 

Monitor is an HP w1907.

Windows version I'm installing is Windows 7 Professional 64 bit.

"brb gonna go download some RAM"

Link to comment
https://linustechtips.com/topic/395517-windows-7-installation-help/
Share on other sites

Link to post
Share on other sites

When I'm installing an OS, I tend to leave the media connected to the PC, whether it's a USB drive or optical drive until I know the OS is functional. Is your system set to boot off of the hard drive?

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

"I didn't die! I performed a tactical reset!" - Apollolol

Link to post
Share on other sites

You sir, Had a friend that is now not a friend

CPU: A8-5600K GPU: MSI RX 480 GAMING X 4GB MOBO: ASUS A55BM-PLUS 

RAM: 2x 4GB Samsung DDR3-1600 1.25V PSU: Corsair CX430 CASE: Enermax Ostrog Windowed STORAGE: PNY CS1111 120GB / Hitachi 1TB 7200RPM OS: Windows 10 Pro & macOS Sierra 10.12.3

 

Link to post
Share on other sites

You sir, Had a friend that is now not a friend

Indeed. Unwise to do that.

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

"I didn't die! I performed a tactical reset!" - Apollolol

Link to post
Share on other sites

So I'm following this guide (http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-2.htm#step1). I got to that particular step, but after restarting it just goes back to going through the process of accepting terms, installing on a drive, etc.

 

Then I was told from a tech friend that I should remove the USB when the computer was restarting, but now the monitor isn't getting any video from neither the video card or motherboard.

 

Here is my current part list:

http://pcpartpicker.com/user/4ks_/saved/JTFrxr

Not on there includes a 500gb Western Digital Caviar Blue and an optical drive both salvaged from an old computer.

 

Monitor is an HP w1907.

Windows version I'm installing is Windows 7 Professional 64 bit.

you do the first boot with the usb...then when the pc reboots..you change the boot back to the hdd as the first

If you need remote help fixing something on your computer

I can help over Teamviewer if you wish

just msg me on my profile

Link to post
Share on other sites

Indeed. Unwise to do that.

My dad was watching me install windows and it was rebooting and he almost pulled the USB out, I freaking flipped out for like 15 minutes

CPU: A8-5600K GPU: MSI RX 480 GAMING X 4GB MOBO: ASUS A55BM-PLUS 

RAM: 2x 4GB Samsung DDR3-1600 1.25V PSU: Corsair CX430 CASE: Enermax Ostrog Windowed STORAGE: PNY CS1111 120GB / Hitachi 1TB 7200RPM OS: Windows 10 Pro & macOS Sierra 10.12.3

 

Link to post
Share on other sites

Alright, so I was able to fix the output problem.

 

After that, I proceeded to go into to bios to boot of the USB and go through the initial process.

When it prompted to restart, I immediately went back into the bios to boot from the HDD.

Now it seems to be going back on track.

"brb gonna go download some RAM"

Link to post
Share on other sites

Alright, so I was able to fix the output problem.

 

After that, I proceeded to go into to bios to boot of the USB and go through the initial process.

When it prompted to restart, I immediately went back into the bios to boot from the HDD.

Now it seems to be going back on track.

Everything's good so far then?

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

"I didn't die! I performed a tactical reset!" - Apollolol

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×