Jump to content

Cable sleeving

Polish_Laska
By Polish_Laska
in Cases and Mods
 Share
Go to solution Solved by knight_40k,

Sometimes you need to work it in a little. Remember to burn the end so it doesnt fray and then rotate it while squishing and stretching it.

 

Also, it might look flat, but once you get it fully on the cable, you need to hold one end and pull/strech it out over the cable and it will round up. Sorry for my bad describing, there are several videos on youtube about sleeving, search lutro0.

Posted

remove the cable tie, and it should het round. Otherwise try to "push" on the flat ends, to open it up, and put the wire through

CPU: Intel i7 4790K @4.8GhZ  CPU Cooler: Be Quiet! Dark Rock Pro 2  Motherboard: Gigabyte Z97 UD3H  GPU: Asus ROG RX 480 8G OC Memory: 32GB Gskill Ares 2400Mhz  Storage: 2x Crucial M4 512GB SSD (raid0)  / 1TB Seagate FireCuda SSHD Case: Phanteks Enthoo Evolv ATX PSU: EVGA SuperNOVA P2 750W  Operating System: Windows 10 Enterprise LTSB (64 bit) Other: NZXT Hue+ LED Controller with 8 LED Strips for desk and PC lighting

 

Link to comment
https://linustechtips.com/topic/37600-cable-sleeving/#findComment-483176
Share on other sites
Link to post
Share on other sites
Posted
  • Author

remove the cable tie, and it should het round. Otherwise try to "push" on the flat ends, to open it up, and put the wire through

Still nothing, Thanks though. I guess I will just get new sleeving that is a kit rather than ebay or something. Any suggestions?

Link to comment
https://linustechtips.com/topic/37600-cable-sleeving/#findComment-483181
Share on other sites
Link to post
Share on other sites
Posted

try stick a pen in it to widen it up?

CPU: Intel i7 4790K @4.8GhZ  CPU Cooler: Be Quiet! Dark Rock Pro 2  Motherboard: Gigabyte Z97 UD3H  GPU: Asus ROG RX 480 8G OC Memory: 32GB Gskill Ares 2400Mhz  Storage: 2x Crucial M4 512GB SSD (raid0)  / 1TB Seagate FireCuda SSHD Case: Phanteks Enthoo Evolv ATX PSU: EVGA SuperNOVA P2 750W  Operating System: Windows 10 Enterprise LTSB (64 bit) Other: NZXT Hue+ LED Controller with 8 LED Strips for desk and PC lighting

 

Link to comment
https://linustechtips.com/topic/37600-cable-sleeving/#findComment-483251
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

Sometimes you need to work it in a little. Remember to burn the end so it doesnt fray and then rotate it while squishing and stretching it.

 

Also, it might look flat, but once you get it fully on the cable, you need to hold one end and pull/strech it out over the cable and it will round up. Sorry for my bad describing, there are several videos on youtube about sleeving, search lutro0.

[Case] Phanteks Eclipse P400S TG (Air Mesh) || [CPU] Ryzen 7 5800X || [Cooler] Dark Rock Slim || [Mobo] ROG STRIX B550-F || [RAM] 32GB Trident Z RGB 3600MHz CL16

[GPU] XFX MERC319 Radeon RX 6950XT || [SSD] 1TB WD SN550 M.2 NVME || [HDD] 6TB Seagate IronWolf 7200 || [PSU] Corsair AX850

[Display] LG 27GL850 @ 2560x1440 - 144Hz || [Mouse] ROG Gladius II || [Keyboard] ROG Strix Flare (Cherry MX Red) || [Speakers] 2.1 Logitech Z-3 || [Fans] 6x 120mm Corsair LL RGB

 

Theater Room - My 11.1 Home Theater

Link to comment
https://linustechtips.com/topic/37600-cable-sleeving/#findComment-487694
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Sometimes you need to work it in a little. Remember to burn the end so it doesnt fray and then rotate it while squishing and stretching it.

 

Also, it might look flat, but once you get it fully on the cable, you need to hold one end and pull/strech it out over the cable and it will round up. Sorry for my bad describing, there are several videos on youtube about sleeving, search lutro0.

Nice man thanks, it looks like you do a decent job. Few of my friends told me about your channel but I forgot to check it out. Thanks dude

Link to comment
https://linustechtips.com/topic/37600-cable-sleeving/#findComment-487705
Share on other sites
Link to post
Share on other sites
Posted

Nice man thanks, it looks like you do a decent job. Few of my friends told me about your channel but I forgot to check it out. Thanks dude

 

I'm not lutro0, just referring you to his channel because it helped me a lot.

[Case] Phanteks Eclipse P400S TG (Air Mesh) || [CPU] Ryzen 7 5800X || [Cooler] Dark Rock Slim || [Mobo] ROG STRIX B550-F || [RAM] 32GB Trident Z RGB 3600MHz CL16

[GPU] XFX MERC319 Radeon RX 6950XT || [SSD] 1TB WD SN550 M.2 NVME || [HDD] 6TB Seagate IronWolf 7200 || [PSU] Corsair AX850

[Display] LG 27GL850 @ 2560x1440 - 144Hz || [Mouse] ROG Gladius II || [Keyboard] ROG Strix Flare (Cherry MX Red) || [Speakers] 2.1 Logitech Z-3 || [Fans] 6x 120mm Corsair LL RGB

 

Theater Room - My 11.1 Home Theater

Link to comment
https://linustechtips.com/topic/37600-cable-sleeving/#findComment-487708
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×