Jump to content

so recently once in a while i get my gpu to black screen on me like a lock up or something and i was running my cpu at turbo 3.9 stock voltage i thought it was my gpu but later i decided that it could be a pcie that is failing or something. how do i fix pcie clocks? i didnt get any lockups since running on stock frequency (~10h)

 

msi g55 z97

4690k

r9 290 vapor x

cheap pcie wifi card

rm750w psu

Link to comment
https://linustechtips.com/topic/369915-cpu-turbo-and-pcie-problem/
Share on other sites

Link to post
Share on other sites

reset the CMOS by shorting the CMOS jumper

 

otherwise remove the CMOS battery

Budget? Uses? Currency? Location? Operating System? Peripherals? Monitor? Use PCPartPicker wherever possible. 

Quote whom you're replying to, and set option to follow your topics. Or Else we can't see your reply.

 

Link to post
Share on other sites

when do i do it? after overclock or before OC? and i have to take out my gpu to do so lol

before OCing again

Budget? Uses? Currency? Location? Operating System? Peripherals? Monitor? Use PCPartPicker wherever possible. 

Quote whom you're replying to, and set option to follow your topics. Or Else we can't see your reply.

 

Link to post
Share on other sites

Uh, 3.9 GHz turbo is stock clocks for the 4690K. Looks like you didn't change clocks at all.

no stock is 3.5 and turbo witch is kinda overclock is 3.9 and yea if i run turbo its just automatically change the multiplier. i know it can cause some problems on AMD processors with bridges and stuff but intel should have sorted it out. obviously its not. what should i do?

Link to post
Share on other sites

no stock is 3.5 and turbo witch is kinda overclock is 3.9 and yea if i run turbo its just automatically change the multiplier. i know it can cause some problems on AMD processors with bridges and stuff but intel should have sorted it out. obviously its not. what should i do?

 

Turbo is not an overclock, it is stock behavior that will happen automatically out of the box, and it's validated by Intel to run safely like that. Most likely the problem you're running into has some other cause.

Link to post
Share on other sites

ok so now im running stock so i have to clear cmos and than go to bios and enable the turbo?

disable and see if the system crashes again

Budget? Uses? Currency? Location? Operating System? Peripherals? Monitor? Use PCPartPicker wherever possible. 

Quote whom you're replying to, and set option to follow your topics. Or Else we can't see your reply.

 

Link to post
Share on other sites

Turbo is not an overclock, it is stock behavior that will happen automatically out of the box, and it's validated by Intel to run safely like that. Most likely the problem you're running into has some other cause.

fuck fuck fuck fuck fuck fuck fuck fuck fuck fuck fuck fuck fuck fuck !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

it crashed again  when i was writing you a reply its not a pcie problem. cpu is stock

Link to post
Share on other sites

blue screen or black screen?

 

swap to the iGPU

Budget? Uses? Currency? Location? Operating System? Peripherals? Monitor? Use PCPartPicker wherever possible. 

Quote whom you're replying to, and set option to follow your topics. Or Else we can't see your reply.

 

Link to post
Share on other sites

no it doesnt work at all if my gpu is inserted and i think its not an option to use onboard gpu with external gpu on my MB idk i could be wrong

so i'd assume it wouldn't be a fault with the PCI-E otherwise it wouldn't recognise that there's a graphics card plugged in. i could be mistaken but have you tried using a different graphics card?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×