Please Help w/ New Build (GPU)

[ukgamer411]

Hey guys,

 

I've put together all my PC components as listed below

EVGA Geforce GFX 970

i7-4970K

Corsair 750M

Asus Maximus Ranger VII

Corsair Vengance (2x8GB)

 

Everytime I load up my PC everything spins up, stops, then spins up again and my moniter read "Please power down and use the PCe cables that came with the card" or something, and my motherboard reads error 67.

 

What do I do? Everything spins, the CPU and GPU fans all spin and everything seems normal.

 

Thanks from ukgamer411.

[C0LL0SS0S]

Well have you used all PCI power cables that came with the Card ?

[ukgamer411]

I've tried plugging in 2x6 pins into the card and I've also tried using the adapter that came with it so 2x6 pins into 1x8 pin, and i've tried using 1x6 pin and the 2 pin that is next to it to create a 1x8 pin and everything keeps bringing up the same error message.

[Ganz]

Make sure you have cables plugged into both the 8-pin and 6-pin connectors on the card.

 

EDIT or both 6 pin if that's what the card uses. I don't remember...

[ukgamer411]

Make sure you have cables plugged into both the 8-pin and 6-pin connectors on the card.

 

EDIT or both 6 pin if that's what the card uses. I don't remember...

 

OMG! Thank you so much! Now that error has been solved I've got another error. says "CPU fan error! Press F1 to setup" I've never hard of a fan having an error before.

[Guest]

OMG! Thank you so much! Now that error has been solved I've got another error. says "CPU fan error! Press F1 to setup" I've never hard of a fan having an error before.

The fan spins doesn't it? If it doesn't, make sure all the pins are lined up, one could be accidentally bumped over and off the connector.

[ukgamer411]

The fan spins doesn't it? If it doesn't, make sure all the pins are lined up, one could be accidentally bumped over and off the connector.

 

The CPU fan spins it just says it is spinning at 4000Mhz and it should be spinning at 4400Mhz

[Guest]

The CPU fan spins it just says it is spinning at 4000Mhz and it should be spinning at 4400Mhz

A. It's RPM.

B. Don't know what to tell ya, you may need to get the warranty for that MoBo.