PC not booting

[Br3tt96]

I got greedy and tried to Oc my ram to get a higher cine bench score, but now of course it starts for a second and turns off on and on and on. Turns on for a sec then turns off and continues... What can I do to fix it?

[Seabosz]

i have the same issue for me it was a broken fan (bruh) causing shortage just try unpluging some components and see if it starts

 

if nothing works i thinks you pushed the ram to hard and the died

 

 

 

-HaVe A NiCe DaY

[Br3tt96]

i have the same issue for me it was a broken fan (bruh) causing shortage just try unpluging some components and see if it starts

 

if nothing works i thinks you pushed the ram to hard and the died

 

 

 

-HaVe A NiCe DaY

I didn't overclock it much at all... So could I just remove the battery for a bit

[CapricaBuccaneers]

Use the MemOK! button on your motherboard, it should be just above the 24-pin power connector.

You'll need to hold it down for 3s after the motherboard is powered on.

[airdeano]

I didn't overclock it much at all... So could I just remove the battery for a bit

 

yes or use the Clear CMOS jumper:

 

[Br3tt96]

yes or use the Clear CMOS jumper:

 

clr_cmos.jpg

So I move the jumper over to the next pins for a few seconds, put it back and then boot?

[CapricaBuccaneers]

Use clear cmos button on the back, if you want to reset your bios settings.

[airdeano]

after consulting the manual, that is the clr_clk (bad info newegg).

use the Mem_OK button or remove battery.

[Br3tt96]

I appreciate the help guys! I removed the battery for a bit and it booted.