Jump to content

Hey guys,

 

I have an i7-3770 on an ASUS P8Z77 V-LK. I can raise the core multipliers up to 41, letting me get a stable 4.1GHz on all four cores (any higher and the cores will just run at 4.1GHz under load). However, I messed around with the BCLK a bit and it seems I can get a bit farther this way. At a BCLK of 104, my CPU was running a stable ~4.26GHz on all four cores, even under load. 

 

So my questions are: is raising the BCLK safe? If so, how high could I go before it would be considered unsafe? I also have 16GB of crucial ballistix sport, can I raise the BCLK without worrying about the RAM speed going over 1600MHz or should I lower it down to say 1400MHz?

 

Thanks!

Link to comment
https://linustechtips.com/topic/355668-is-raising-bclk-safe/
Share on other sites

Link to post
Share on other sites

Hey guys,

 

I have an i7-3770 on an ASUS P8Z77 V-LK. I can raise the core multipliers up to 41, letting me get a stable 4.1GHz on all four cores (any higher and the cores will just run at 4.1GHz under load). However, I messed around with the BCLK a bit and it seems I can get a bit farther this way. At a BCLK of 104, my CPU was running a stable ~4.26GHz on all four cores, even under load. 

 

So my questions are: is raising the BCLK safe? If so, how high could I go before it would be considered unsafe? I also have 16GB of crucial ballistix sport, can I raise the BCLK without worrying about the RAM speed going over 1600MHz or should I lower it down to say 1400MHz?

 

Thanks!

Raising it is safe, but make sure you check that everything in your computer works properly, increasing the BCLK in newer Intel CPU's can make the entire computer act wierd if its too high.

           .;ldkO0000Okdl;.                michael@SUSE-BlackBox
        .;d00xl:^''''''^:ok00d;.            OS: openSUSE 20260405
      .d00l'                'o00d.          Kernel: x86_64 Linux 6.19.11-1-default
    .d0K^'  Okxoc;:,.          ^O0d.        Uptime: 2d 21h 52m
   .OVVAK0kOKKKKKKKKKKOxo:,      lKO.       Packages: 6556
  ,0VVAKKKKKKKKKKKKK0P^,,,^dx:    ;00,      Shell: bash 5.3.9
 .OVVAKKKKKKKKKKKKKk'.oOPPb.'0k.   cKO.     Resolution: 3840x1080
 :KVAKKKKKKKKKKKKKK: kKx..dd lKd   'OK:     DE: KDE
 lKlKKKKKKKKKOx0KKKd ^0KKKO' kKKc   lKl     WM: KWin
 lKlKKKKKKKKKK;.;oOKx,..^..;kKKK0.  lKl     GTK Theme: Breeze-Dark [GTK2], Breeze [GTK3]
 :KAlKKKKKKKKK0o;...^cdxxOK0O/^^'  .0K:     Icon Theme: breeze-dark
  kKAVKKKKKKKKKKKK0x;,,......,;od  lKP      Disk: 13T / 22T (60%)
  '0KAVKKKKKKKKKKKKKKKKKK00KKOo^  c00'      CPU: AMD Ryzen 7 5800X3D 8-Core @ 16x 4.55295GHz
   'kKAVOxddxkOO00000Okxoc;''   .dKV'       GPU: AMD Radeon RX 6700 XT (radeonsi, navi22, ACO, DRM 3.64, 6.19.11-1-default)
     l0Ko.                    .c00l'        RAM: 13127MiB / 48094MiB
      'l0Kk:.              .;xK0l'          
         'lkK0xc;:,,,,:;odO0kl'             
             '^:ldxkkkkxdl:^'    

 

Link to comment
https://linustechtips.com/topic/355668-is-raising-bclk-safe/#findComment-4828679
Share on other sites

Link to post
Share on other sites

Raising it is safe, but make sure you check that everything in your computer works properly, increasing the BCLK in newer Intel CPU's can make the entire computer act wierd if its too high.

Thanks for your reply.

 

Is there anything in particular I should be watching for? Weird in what way?

Link to comment
https://linustechtips.com/topic/355668-is-raising-bclk-safe/#findComment-4828721
Share on other sites

Link to post
Share on other sites

Thanks for your reply.

 

Is there anything in particular I should be watching for? Weird in what way?

Something in your computer not acting the way it should after increasing the BCLK. Normally though you get a BSOD before any issues-normally.

           .;ldkO0000Okdl;.                michael@SUSE-BlackBox
        .;d00xl:^''''''^:ok00d;.            OS: openSUSE 20260405
      .d00l'                'o00d.          Kernel: x86_64 Linux 6.19.11-1-default
    .d0K^'  Okxoc;:,.          ^O0d.        Uptime: 2d 21h 52m
   .OVVAK0kOKKKKKKKKKKOxo:,      lKO.       Packages: 6556
  ,0VVAKKKKKKKKKKKKK0P^,,,^dx:    ;00,      Shell: bash 5.3.9
 .OVVAKKKKKKKKKKKKKk'.oOPPb.'0k.   cKO.     Resolution: 3840x1080
 :KVAKKKKKKKKKKKKKK: kKx..dd lKd   'OK:     DE: KDE
 lKlKKKKKKKKKOx0KKKd ^0KKKO' kKKc   lKl     WM: KWin
 lKlKKKKKKKKKK;.;oOKx,..^..;kKKK0.  lKl     GTK Theme: Breeze-Dark [GTK2], Breeze [GTK3]
 :KAlKKKKKKKKK0o;...^cdxxOK0O/^^'  .0K:     Icon Theme: breeze-dark
  kKAVKKKKKKKKKKKK0x;,,......,;od  lKP      Disk: 13T / 22T (60%)
  '0KAVKKKKKKKKKKKKKKKKKK00KKOo^  c00'      CPU: AMD Ryzen 7 5800X3D 8-Core @ 16x 4.55295GHz
   'kKAVOxddxkOO00000Okxoc;''   .dKV'       GPU: AMD Radeon RX 6700 XT (radeonsi, navi22, ACO, DRM 3.64, 6.19.11-1-default)
     l0Ko.                    .c00l'        RAM: 13127MiB / 48094MiB
      'l0Kk:.              .;xK0l'          
         'lkK0xc;:,,,,:;odO0kl'             
             '^:ldxkkkkxdl:^'    

 

Link to comment
https://linustechtips.com/topic/355668-is-raising-bclk-safe/#findComment-4828743
Share on other sites

Link to post
Share on other sites

BCLK overclocks all the components (pcie, ram etc.) and so it can possibly damage the other components in your system. A small increase in BCLK should be fine though. 

Desktop: The Bluez | CPU: i5-3570k @ 4.5 ghz 1.296V | CPU Cooler: Hyper 212 Evo | Motherboard: P8Z77 M-Pro | Memory: 16 GB 1600Mhz Kingston HyperX  


GPU: Asus GTX 780ti DirectCu II | HDD: Some Random Hitachi 1TB, WD Blue 1TB, 850 EVO 500GB | PSU: Rosewill Hive 750W | Case: Enermax Ostrog GT (Blue Ver.) 


Laptop: Razer Blade 14 2013 256GB

Link to comment
https://linustechtips.com/topic/355668-is-raising-bclk-safe/#findComment-4828803
Share on other sites

Link to post
Share on other sites

So would 105 BCLK be fine? It's gotten me to 4.3GHz with acceptable temps.

Yes, its the same as an FSB overclock with older CPU's (eg Core 2 Duo E8500), with the same risks. As long as the overclock is stable its fine.

           .;ldkO0000Okdl;.                michael@SUSE-BlackBox
        .;d00xl:^''''''^:ok00d;.            OS: openSUSE 20260405
      .d00l'                'o00d.          Kernel: x86_64 Linux 6.19.11-1-default
    .d0K^'  Okxoc;:,.          ^O0d.        Uptime: 2d 21h 52m
   .OVVAK0kOKKKKKKKKKKOxo:,      lKO.       Packages: 6556
  ,0VVAKKKKKKKKKKKKK0P^,,,^dx:    ;00,      Shell: bash 5.3.9
 .OVVAKKKKKKKKKKKKKk'.oOPPb.'0k.   cKO.     Resolution: 3840x1080
 :KVAKKKKKKKKKKKKKK: kKx..dd lKd   'OK:     DE: KDE
 lKlKKKKKKKKKOx0KKKd ^0KKKO' kKKc   lKl     WM: KWin
 lKlKKKKKKKKKK;.;oOKx,..^..;kKKK0.  lKl     GTK Theme: Breeze-Dark [GTK2], Breeze [GTK3]
 :KAlKKKKKKKKK0o;...^cdxxOK0O/^^'  .0K:     Icon Theme: breeze-dark
  kKAVKKKKKKKKKKKK0x;,,......,;od  lKP      Disk: 13T / 22T (60%)
  '0KAVKKKKKKKKKKKKKKKKKK00KKOo^  c00'      CPU: AMD Ryzen 7 5800X3D 8-Core @ 16x 4.55295GHz
   'kKAVOxddxkOO00000Okxoc;''   .dKV'       GPU: AMD Radeon RX 6700 XT (radeonsi, navi22, ACO, DRM 3.64, 6.19.11-1-default)
     l0Ko.                    .c00l'        RAM: 13127MiB / 48094MiB
      'l0Kk:.              .;xK0l'          
         'lkK0xc;:,,,,:;odO0kl'             
             '^:ldxkkkkxdl:^'    

 

Link to comment
https://linustechtips.com/topic/355668-is-raising-bclk-safe/#findComment-4828883
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×