Jump to content

Mayhems Red is bad?

Go to solution Solved by AMD Lover,

Does it also stain the rads/block/res? If i go for a white liquid without changing the components after using red, will it slowly become pink? (The only thing i might change are the tubes)

You can't see in a rad, most blocks are solid unless you get acrylic and no if you watch any of Linus's whole room watercooling videos the tubes are practically brown from bacteria but it doesn't transfer to the water enough to do anything.

 

Also like I said flush with distilled water for a month before changing colors and you should be fine. Could probably even only do it for a few hours.

Is it true that mayhems pastel red is bad for your loop? I heard that it stains your tubes and blocks the components. If so, is it only red?

 

Thanks.

 

EDIT: Or the Mayhems Aurora in fact.

Link to comment
Share on other sites

Link to post
Share on other sites

Any colored liquid is gonna stain over a period of time. :)

Work Desktop | CPU: Intel Core i7 4770k | GPU: Quadro K1200 | Motherboard: EVGA Z97 Classified | RAM: Corsair Dominator Platinum 32GB (4x8GB) DDR3-2133Mhz | PSU: Seasonic 750W SS-750KM3 80 PLUS Gold | STORAGE: WD 1TB Se Enterprise Grade Drive & Corsair Neutron NX500 400GB NVMe PCIe  | COOLER: Enermax Liqtech 240 -  5x Noctua NF-F12 iPPC 2000 PWM | CASE: Corsair 600C | OS: Windows 10 Pro | Peripherals: Logitech MX Master 2S -- Logitech K840 -- INTEL X520 10Gb NIC -- 3x Acer H236HL -- Build Log | 

 

Work Server | CPU: Intel Xeon E5-2650 v3 | Model: Cisco UCS C220 M4 (SFF) | RAM: 64GB (4x16GB) Cisco (Samsung) DDR4 2133Mhz | STORAGE: 4x Cisco (Seagate) 900GB 10K 2.5" (RAID 10) - 2x 32GB Cisco FlexFlash Boot Drive (RAID 1) | OS: vSphere 6.7 Enterprise Plus U3 | 

 

Laptop | CPU: Intel Core i7 6700HQ | GPU: Nvidia GTX 960M 2GB GDDR5 | RAM: 32GB (2 x 16GB) DDR4-2400Mhz | STORAGE: 512GB Hynix NVMe | OS: Windows 10 Pro |

 

Gaming Desktop | CPU: Intel Core i7 9700K | GPU: Gigabyte RTX 2080 WINDFORCE 8G  | Motherboard: ASRock Z390 PHANTOM GAMING-ITX | RAM: Ballistix Elite 32GB Kit (16GB x 2) DDR4-3000 | PSU: Silverstone SX700-LPT 700w 80 PLUS Platinum | STORAGE: 2x Samsung 970 PRO 1TB NVMe | COOLER: Noctua NH-L12 | CASE: Louqe Ghost S1 | OS: Windows 10 Pro | Build Log in Progress | 

 

Home Server | CPU: Intel Xeon E5-2690 (Sandy Bridge) | GPU: Quadro P2000 | Motherboard: SUPERMICRO X9SRL-F  | RAM: 64GB (8x8GB) Micron VLP DDR3-1600 ECC | PSU: SUPERMICRO 665W 80 PLUS Bronze | STORAGE: 2x Samsung 860 EVO 500GB (RAID 1) - 4x WD 8TB Ultrastar (RAID 10) - Intel SSD D3-S4510 Series 240GB (BOOT)  | COOLER: Noctua NH-U12DXi4 with 2x Noctua NF-F12 iPPC 3000 PWM | CASE: SUPERMICRO CSE-842TQ-665B 4U | OS: vSphere 6.7 Enterprise Plus U3 | Build Log in Progress |

 

| Pixel 4XL 128GB - Clearly White - Unlocked - Carrier: Visible |

 

| F@H STATS |

Link to comment
Share on other sites

Link to post
Share on other sites

Any colored liquid is gonna stain over a period of time. :)

So red doesn't make it stain any more or block the loop somewhere?

Link to comment
Share on other sites

Link to post
Share on other sites

Is it true that mayhems pastel red is bad for your loop? I heard that it stains your tubes and blocks the components. If so, is it only red?

 

Thanks.

 

None of the Mayhems X1 or Pastel coolants block/clog your loop, the coolants are made from nano-particles way to small to clog anything and people who've had problems with it got the gunk from other things like poorly rinsed rads etc.

 

As for the staining, yes all colored Mayhems coolants except for white can potentially permanently stain your tubing and water blocks. Red and Pink are the most notorious culprits so you have to decide whether you're willing to deal with it if it does stain your WC components.

 

As long as you have red coolant in there you won't see the staining and tubing is easily replaced.

Bert & Ernie before squirting spermie. 

Link to comment
Share on other sites

Link to post
Share on other sites

Over time anything will stain a loop. It can't be avoided unless you go with clear liquid. That being said, unless you plan on changing the colour, going with red won't be an issue. And for aurora, only go with aurora 2. The first variant is only meant for shows. 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

None of the Mayhems X1 or Pastel coolants block/clog your loop, the coolants are made from nano-particles way to small to clog anything and people who've had problems with it got the gunk from other things like poorly rinsed rads etc.

 

As for the staining, yes all colored Mayhems coolants except for white can potentially permanently stain your tubing and water blocks. Red and Pink are the most notorious culprits so you have to decide whether you're willing to deal with it if it does stain your WC components.

 

As long as you have red coolant in there you won't see the staining and tubing is easily replaced.

Does it also stain the rads/block/res? If i go for a white liquid without changing the components after using red, will it slowly become pink? (The only thing i might change are the tubes)

Link to comment
Share on other sites

Link to post
Share on other sites

So red doesn't make it stain any more or block the loop somewhere?

The red might stain a little more than other dyes because thats what the coolants are made out of but stuff like acrylic and acetal and other metal products used for waterblocks aren't gonna stain that quickly if any. The tubing if you're not doing hard can be easily replaced and if you want to be extra careful when you clean your loop you could always run some pure distilled water through it for like a month at a time every 6 months and it would *probably* keep it from staining.

Work Desktop | CPU: Intel Core i7 4770k | GPU: Quadro K1200 | Motherboard: EVGA Z97 Classified | RAM: Corsair Dominator Platinum 32GB (4x8GB) DDR3-2133Mhz | PSU: Seasonic 750W SS-750KM3 80 PLUS Gold | STORAGE: WD 1TB Se Enterprise Grade Drive & Corsair Neutron NX500 400GB NVMe PCIe  | COOLER: Enermax Liqtech 240 -  5x Noctua NF-F12 iPPC 2000 PWM | CASE: Corsair 600C | OS: Windows 10 Pro | Peripherals: Logitech MX Master 2S -- Logitech K840 -- INTEL X520 10Gb NIC -- 3x Acer H236HL -- Build Log | 

 

Work Server | CPU: Intel Xeon E5-2650 v3 | Model: Cisco UCS C220 M4 (SFF) | RAM: 64GB (4x16GB) Cisco (Samsung) DDR4 2133Mhz | STORAGE: 4x Cisco (Seagate) 900GB 10K 2.5" (RAID 10) - 2x 32GB Cisco FlexFlash Boot Drive (RAID 1) | OS: vSphere 6.7 Enterprise Plus U3 | 

 

Laptop | CPU: Intel Core i7 6700HQ | GPU: Nvidia GTX 960M 2GB GDDR5 | RAM: 32GB (2 x 16GB) DDR4-2400Mhz | STORAGE: 512GB Hynix NVMe | OS: Windows 10 Pro |

 

Gaming Desktop | CPU: Intel Core i7 9700K | GPU: Gigabyte RTX 2080 WINDFORCE 8G  | Motherboard: ASRock Z390 PHANTOM GAMING-ITX | RAM: Ballistix Elite 32GB Kit (16GB x 2) DDR4-3000 | PSU: Silverstone SX700-LPT 700w 80 PLUS Platinum | STORAGE: 2x Samsung 970 PRO 1TB NVMe | COOLER: Noctua NH-L12 | CASE: Louqe Ghost S1 | OS: Windows 10 Pro | Build Log in Progress | 

 

Home Server | CPU: Intel Xeon E5-2690 (Sandy Bridge) | GPU: Quadro P2000 | Motherboard: SUPERMICRO X9SRL-F  | RAM: 64GB (8x8GB) Micron VLP DDR3-1600 ECC | PSU: SUPERMICRO 665W 80 PLUS Bronze | STORAGE: 2x Samsung 860 EVO 500GB (RAID 1) - 4x WD 8TB Ultrastar (RAID 10) - Intel SSD D3-S4510 Series 240GB (BOOT)  | COOLER: Noctua NH-U12DXi4 with 2x Noctua NF-F12 iPPC 3000 PWM | CASE: SUPERMICRO CSE-842TQ-665B 4U | OS: vSphere 6.7 Enterprise Plus U3 | Build Log in Progress |

 

| Pixel 4XL 128GB - Clearly White - Unlocked - Carrier: Visible |

 

| F@H STATS |

Link to comment
Share on other sites

Link to post
Share on other sites

Does it also stain the rads/block/res? If i go for a white liquid without changing the components after using red, will it slowly become pink? (The only thing i might change are the tubes)

You can't see in a rad, most blocks are solid unless you get acrylic and no if you watch any of Linus's whole room watercooling videos the tubes are practically brown from bacteria but it doesn't transfer to the water enough to do anything.

 

Also like I said flush with distilled water for a month before changing colors and you should be fine. Could probably even only do it for a few hours.

Work Desktop | CPU: Intel Core i7 4770k | GPU: Quadro K1200 | Motherboard: EVGA Z97 Classified | RAM: Corsair Dominator Platinum 32GB (4x8GB) DDR3-2133Mhz | PSU: Seasonic 750W SS-750KM3 80 PLUS Gold | STORAGE: WD 1TB Se Enterprise Grade Drive & Corsair Neutron NX500 400GB NVMe PCIe  | COOLER: Enermax Liqtech 240 -  5x Noctua NF-F12 iPPC 2000 PWM | CASE: Corsair 600C | OS: Windows 10 Pro | Peripherals: Logitech MX Master 2S -- Logitech K840 -- INTEL X520 10Gb NIC -- 3x Acer H236HL -- Build Log | 

 

Work Server | CPU: Intel Xeon E5-2650 v3 | Model: Cisco UCS C220 M4 (SFF) | RAM: 64GB (4x16GB) Cisco (Samsung) DDR4 2133Mhz | STORAGE: 4x Cisco (Seagate) 900GB 10K 2.5" (RAID 10) - 2x 32GB Cisco FlexFlash Boot Drive (RAID 1) | OS: vSphere 6.7 Enterprise Plus U3 | 

 

Laptop | CPU: Intel Core i7 6700HQ | GPU: Nvidia GTX 960M 2GB GDDR5 | RAM: 32GB (2 x 16GB) DDR4-2400Mhz | STORAGE: 512GB Hynix NVMe | OS: Windows 10 Pro |

 

Gaming Desktop | CPU: Intel Core i7 9700K | GPU: Gigabyte RTX 2080 WINDFORCE 8G  | Motherboard: ASRock Z390 PHANTOM GAMING-ITX | RAM: Ballistix Elite 32GB Kit (16GB x 2) DDR4-3000 | PSU: Silverstone SX700-LPT 700w 80 PLUS Platinum | STORAGE: 2x Samsung 970 PRO 1TB NVMe | COOLER: Noctua NH-L12 | CASE: Louqe Ghost S1 | OS: Windows 10 Pro | Build Log in Progress | 

 

Home Server | CPU: Intel Xeon E5-2690 (Sandy Bridge) | GPU: Quadro P2000 | Motherboard: SUPERMICRO X9SRL-F  | RAM: 64GB (8x8GB) Micron VLP DDR3-1600 ECC | PSU: SUPERMICRO 665W 80 PLUS Bronze | STORAGE: 2x Samsung 860 EVO 500GB (RAID 1) - 4x WD 8TB Ultrastar (RAID 10) - Intel SSD D3-S4510 Series 240GB (BOOT)  | COOLER: Noctua NH-U12DXi4 with 2x Noctua NF-F12 iPPC 3000 PWM | CASE: SUPERMICRO CSE-842TQ-665B 4U | OS: vSphere 6.7 Enterprise Plus U3 | Build Log in Progress |

 

| Pixel 4XL 128GB - Clearly White - Unlocked - Carrier: Visible |

 

| F@H STATS |

Link to comment
Share on other sites

Link to post
Share on other sites

Does it also stain the rads/block/res? If i go for a white liquid without changing the components after using red, will it slowly become pink? (The only thing i might change are the tubes)

 

You want be able to see any staining in the rads anyway. Res, AFAIK no. Tubing and water blocks are the ones usually affected. You can get water blocks that don't have clear plexi covers, like those from EK with acetal covers so you won't see the staining. 

 

Doubt the coolant would change to pink, the stains are usually hard set. Light staining can removed with baking soda and water or white vinegar and water.

 

So all in all, it's not that big of deal. There are ways to get around staining. 

Bert & Ernie before squirting spermie. 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×