Jump to content

G.skill RAM voltage 1.5~1.6v ?

Untitled
 Share
Posted

http://www.gskill.com/en/product/f3-17000cl11d-8gbxl

 

take a look at this ribjaws spec, the tested voltage is 1.5 ~ 1.6v. so, is it 1.5v or 1.6v or automatic? or is it just depends on the CPU? (gonna pair it with 4690k, Z97)

Primary PC
CPU: AMD Ryzen 7 3700X | M/B: Asus ROG Strix X370-F | RAM: G.Skill TridentZ RGB 3200MHz 32GB | GPU: Asus TUF RTX 3070 8GB GDDR6 | SSD: Samsung 960 Evo 250GB | HDD: Seagate Barracuda 4TB x2 | Power: Thermaltake Toughpower 80+ Gold 650W | Sound card: Creative Sound BlasterX AE-5  | Case: NZXT H500 | Cooling: NZXT Kraken X62 | Display: Samsung CHG70 27" 1440p 144Hz QLED
 
Secondary PC
CPU: AMD Ryzen 5 5600 | M/B: Asrock B450M Pro 4 | RAM: Kingston HyperX Predator 3200MHz 16GB | GPU: Asrock RX 5700 8GB GDDR6 | SSD: Crucial P1 1TB | HDD: WD Black 1TB | Power: Coolermaster Masterwatt 550 | Case: Aerocool Cylon Mini | Cooling: BeQuiet Pure Rock Slim 2 | Display: Samsung CFG73 24" 1080p 144Hz QLED
 
Thanks for reading

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

both should work, it doesnt matter that much.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I've never seen a DDR3 kit that's something other than 1.35, 1.5 or 1.65v out of the box. It doesn't matter, whatever it is it'll be in the XMP for the RAM.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I'm not sure about the stability (especially when overclocking), I'm happier to see a 1.5 or 1.65v kit rather than a vary voltage ram. I just don't wanna rely everything on the XMP. :(

Primary PC
CPU: AMD Ryzen 7 3700X | M/B: Asus ROG Strix X370-F | RAM: G.Skill TridentZ RGB 3200MHz 32GB | GPU: Asus TUF RTX 3070 8GB GDDR6 | SSD: Samsung 960 Evo 250GB | HDD: Seagate Barracuda 4TB x2 | Power: Thermaltake Toughpower 80+ Gold 650W | Sound card: Creative Sound BlasterX AE-5  | Case: NZXT H500 | Cooling: NZXT Kraken X62 | Display: Samsung CHG70 27" 1440p 144Hz QLED
 
Secondary PC
CPU: AMD Ryzen 5 5600 | M/B: Asrock B450M Pro 4 | RAM: Kingston HyperX Predator 3200MHz 16GB | GPU: Asrock RX 5700 8GB GDDR6 | SSD: Crucial P1 1TB | HDD: WD Black 1TB | Power: Coolermaster Masterwatt 550 | Case: Aerocool Cylon Mini | Cooling: BeQuiet Pure Rock Slim 2 | Display: Samsung CFG73 24" 1080p 144Hz QLED
 
Thanks for reading

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I have the exact memory kit in my system. I have it set up at 1.6v with 2133MHz.

If I recall, XMP runs the RAM with 1.6V. Regardless, it will not cause any issues with the i5-4690K.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K @ 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×