Jump to content

HELP ARTIFACTING

H4X3R
By H4X3R
in Troubleshooting
 Share
Posted

How fix it it, GPU not OCed (in fact i even tried to down clock the memory and the core). Latest driver.

 

pics:

 

 

 

Spoiler

Samung Tab S 8.4

 

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/
Share on other sites
Link to post
Share on other sites
Posted

Artifacting even when downclocked? That's.....a problem.

 

That sounds like an RMA to me

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604382
Share on other sites
Link to post
Share on other sites
Posted

Damn. Sucks for me cuz i can't even run integrated graphics (because i have none) :S

Try taking the card out of the slot, cleaning the card and the slot, properly reseating and do a full clean install of the drivers.

 

If that doesn't fix it then try underclocking even further. Otherwise I just see no other option than RMA

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604402
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Try taking the card out of the slot, cleaning the card and the slot, properly reseating and do a full clean install of the drivers.

 

If that doesn't fix it then try underclocking even further. Otherwise I just see no other option than RMA

On it, thx.

 

If its new than RMA it :)

It'll take forever because i am over the 30 day return period :( Hope gigabyte support is good.

Spoiler

Samung Tab S 8.4

 

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604411
Share on other sites
Link to post
Share on other sites
Posted

Try taking the card out of the slot, cleaning the card and the slot, properly reseating and do a full clean install of the drivers.

 

If that doesn't fix it then try underclocking even further. Otherwise I just see no other option than RMA

Underclock won't help even more if is going to fix the issue it will have bad impact on the performance so it's pointless.rma

Beware of him that is slow to anger; for when it is long coming, it is the stronger when it comes, and the longer kept. Abused patience turns to fury.
 
Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604415
Share on other sites
Link to post
Share on other sites
Posted

Underclock won't help even more if is going to fix the issue it will have bad impact on the performance

It's worth a shot to temporarily stop the artifacting while he gets the RMA process started.

 

  :( Hope gigabyte support is good.

Has its ups and downs

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604418
Share on other sites
Link to post
Share on other sites
Posted
  • Author

It's worth a shot to temporarily stop the artifacting while he gets the RMA process started.

 

Has its ups and downs

Ok. I tried cleaning the connector and tried it in another pci e slot, still getting the artefacting.

 

But why did it start now? Just when i started to play world of tanks?

Spoiler

Samung Tab S 8.4

 

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604465
Share on other sites
Link to post
Share on other sites
Posted

But why did it start now? Just when i started to play world of tanks?

Probably close to being a bit buggered when it arrived, putting it under normal load maybe screwed it over too much (This should not happen of course). 

 

The point where a GPU starts artifacting can be random as balls. You drew the short straw I'm afraid :c

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604474
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Probably close to being a bit buggered when it arrived, putting it under normal load maybe screwed it over too much (This should not happen of course). 

 

The point where a GPU starts artifacting can be random as balls. You drew the short straw I'm afraid :c

 

It could become worse if you dont do it now.

 

Underclock won't help even more if is going to fix the issue it will have bad impact on the performance so it's pointless.rma

Apparently giving it more voltage helps (worked for a friend of mine). I have already given the 970 +25mV in afterburner, how much is 'safe'? (even for the worst card/s)

Spoiler

Samung Tab S 8.4

 

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604598
Share on other sites
Link to post
Share on other sites
Posted

Apparently giving it more voltage helps (worked for a friend of mine). I have already given the 970 +25mV in afterburner, how much is 'safe'? (even for the worst card/s)

Since you have the same as mine I can tell you this, maxing out the voltage offset gives you 1262mV and that's completely safe

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604600
Share on other sites
Link to post
Share on other sites
Posted

Since you have the same as mine I can tell you this, maxing out the voltage offset gives you 1262mV and that's completely safe

Won't a rma be safer?I mean in future i guess

Beware of him that is slow to anger; for when it is long coming, it is the stronger when it comes, and the longer kept. Abused patience turns to fury.
 
Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604610
Share on other sites
Link to post
Share on other sites
Posted

Won't a rma be safer?I mean in future i guess

Artifacting is not dangerous per se. It's not exactly helping it achieving what it's supposed to do. Holding off for 2-3 days won't kill the card.

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604616
Share on other sites
Link to post
Share on other sites
Posted

Good to know, so + how much mV can i add?

For me stock is 1218mV so +44mV would max out the voltage. The card's bios limits it to 1262mV so just crank up until you reach 1262mV. Recommend you use EVGA Precision X and enable Kboost (always full clock/voltage, not dynamic and no underclocking when idle) to test. You can immediately see values then turn off kboost when you're happy with the values.

RIG: I7-4790k @ 4.5GHz | MSI Z97S SLI Plus | 12GB Geil Dragon RAM 1333MHz | Gigabyte G1 Gaming GTX 970 (1550MHz core/7800MHz memory) @ +18mV(Maxed out at 1650/7800 so far) | Corsair RM750 | Samsung 840 EVO 120GB, 1TB Seagate Barracuda | Fractal Design Arc Midi R2 (Closed) | Sound Blaster Z                                                                                                                        Getting: Noctua NH-D15 | Possible 250GB Samsung 850 Evo                                                                                        Need a console killer that actually shits on every console? Here you go (No MIR/Promo)

This is why you should not get an FX CPU for ANY scenario other than rendering on a budget http://linustechtips.com/main/topic/286142-fx-8350-r9-290-psu-requirements/?p=3892901 | http://linustechtips.com/main/topic/266481-an-issue-with-people-bashing-the-fx-cpus/?p=3620861

Link to comment
https://linustechtips.com/topic/265135-help-artifacting/#findComment-3604711
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×