Ruins build 4.0

[Ruins]

I have made other post before but I barely got any replies and was probably due to the reason I posted it at 12am USA time (I live in Australia). anyway just want your opinion on the build and if there is something i need to change or add then please tell me. just concerned about two things is the motherboard good and the case. this rig is for gaming  (guild wars 2, arche age, league, smite, far cry 4, planet side 2, battlefield 4). also the case is the u3 version which i newer i think, i just couldn't find it in pcpartpicker. 

 

link:http://pcpartpicker.com/p/tXJNWZ

 

$1200AUD ($1000USD however shipping and tax is a lot more expensive so around $850-900) i am on a tight budget 
 

-thanks ruins 

[C_Mike]

Seems good, I would suggest that if you can try and increase your budget a bit to get an SSD

[Glenwing]

It looks fine.  There's nothing that won't work.  Some things aren't ideal, such as using a single stick of RAM instead of 2x4GB won't get the benefit of extra bandwidth from dual-channel mode, but realistically this won't actually affect anything in terms of performance.  The case is pretty outdated, and a few other things, but if you're trying to save as much as possible then I don't see any big problems.  Nothing jumps out to me as being dangerously bad build quality or incompatible.

[Juganog]

what is your budget?

What is the purpose for the build?

 

 

Go with a 2X4 set of ram not 1X8 everything else seems fine and will work well together if this is for gaming.

maybe get an ssd but it isnt necessary 

[Laputacake]

Looks fine to me

[Ruins]

It looks fine.  There's nothing that won't work.  Some things aren't ideal, such as using a single stick of RAM instead of 2x4GB won't get the benefit of extra bandwidth from dual-channel mode, but realistically this won't actually affect anything in terms of performance.  The case is pretty outdated, and a few other things, but if you're trying to save as much as possible then I don't see any big problems.  Nothing jumps out to me as being dangerously bad build quality or incompatible.

@Glenwing yes, that was a mistake (http://pcpartpicker.com/p/tXJNWZ)

 

@Juganog $1200AUD ($1000USD however shipping and tax is a lot more expensive so around $850-900) i am on a tight budget, also TOOO GAME! (guild wars 2, arche age, league, smite, far cry 4, planet side 2, battlefield 4)

[Juganog]

@Glenwing yes, that was a mistake (http://pcpartpicker.com/p/tXJNWZ)

 

@Juganog $1200AUD ($1000USD however shipping and tax is a lot more expensive so around $850-900) i am on a tight budget 

 

Yea im from aus i feel your pain again looks fine to me then

[Ruins]

Yea im from aus i feel your pain again looks fine to me then

yea i managed to cut it down ($60) by going to the place i am buying from PLE computers 

[Juganog]

yea i managed to cut it down ($60) by going to the place i am buying from PLE computers 

i personally use Pccasegear and CPL but they possibly cost alittle more than PLE and what not

[Ruins]

It looks fine.  There's nothing that won't work.  Some things aren't ideal, such as using a single stick of RAM instead of 2x4GB won't get the benefit of extra bandwidth from dual-channel mode, but realistically this won't actually affect anything in terms of performance.  The case is pretty outdated, and a few other things, but if you're trying to save as much as possible then I don't see any big problems.  Nothing jumps out to me as being dangerously bad build quality or incompatible.

@Glenwing also my case is the antec three hundered u3 and i know everything is compatible because i spent a lot of time researching of every component does (anyway thanks)

i personally use Pccasegear  and CPL but they possibly cost alittle more than PLE and what not

yea i was going to go with them  but there isn't a cpl store where i live