Help motherboar

[Gerom]

I need help, i connected the power supply, inserted the ram and all the rest. But my motherboard won't turn on. The CPU fan starts op but my keyboard led won't lite op and I saw noting on que panel

[Tie Lightning]

Specs and pictures please

 

I need help, i connected the power supply, inserted the ram and all the rest. But my motherboard won't turn on. The CPU fan starts op but my keyboard led won't lite op and I saw noting on que panel

[Gerom]

Intel Pentium g3258, msi z97m-g43 and hyperx ram

Hi, its my first build so i dont know how all woks, but i think i got all good, and the pc wont start up, only the fans work

[cab11150904]

Does your processor fan keeps spinning? If not does the computer shut off after a certain amount of time?

[Gerom]

Does your processor fan keeps spinning? If not does the computer shut off after a certain amount of time?

 

It spins and spins, only when i turn the pc off it stops

[Gerom]

I also hear no beeps or someting

[cab11150904]

Take your RAM out and put it back in and if that doesn't work try to get a better picture of your mother board so I can see all of the connections.

[Gerom]

Take your RAM out and put it back in and if that doesn't work try to get a better picture of your mother board so I can see all of the connections.

 

http://i.imgur.com/L9kZq0y.jpg

http://i.imgur.com/CbH1i8y.jpg

http://i.imgur.com/HfI1tmo.jpg

http://i.imgur.com/dc2LhQy.jpg

http://i.imgur.com/hBm6sDj.jpg

[cab11150904]

http://i.imgur.com/L9kZq0y.jpg

http://i.imgur.com/CbH1i8y.jpg

http://i.imgur.com/HfI1tmo.jpg

http://i.imgur.com/dc2LhQy.jpg

http://i.imgur.com/hBm6sDj.jpg

Just to make sure you did put your RAM back in and try to turn it on right?

[Gerom]

Yes i took the ram out to take the pics, i put it back in

[cab11150904]

Are you sure that you're properly connected to your monitor and that your set top the right source to see a video signal?

[Gerom]

Are you sure that you're properly connected to your monitor and that your set top the right source to see a video signal?

 

Yes it is connected, my main problem is that i get no beeps, no usb power, and only fans and led when i trun off the pc

[cab11150904]

Yes it is connected, my main problem is that i get no beeps, no usb power, and only fans and led when i trun off the pc

Try it with one stick of RAM and try it in each slot. Repeat that with any other sticks you have. This rules out had RAM and bad RAM slots.

[Gerom]

Try it with one stick of RAM and try it in each slot. Repeat that with any other sticks you have. This rules out had RAM and bad RAM slots.

 

I tried that and nothing, do u think the motherboard is crap? Its a new one, never used...

[cab11150904]

I tried that and nothing, do u think the motherboard is crap? Its a new one, never used...

I'm not sure. Seems like an option.

[Jetster]

What do your CPU pins look like. Its the #1 mistake of new builder is to bend them

 

There are two power cords. 24 pin and 4/8 pin for CPU power

 

Pull it all parts out of the case and bench test it. The second mistake is not installing standoffs or putting them in the wrong place

[Gerom]

What do your CPU pins look like. Its the #1 mistake of new builder is to bend them

 

There are two power cords. 24 pin and 4/8 pin for CPU power

 

Pull it all parts out of the case and bench test it. The second mistake is not installing standoffs or putting them in the wrong place

 

I will check the pins in a bit, but i was reading that the z97m-g43 supports the pentium with an update or something like that, is that the problem?

[Jetster]

No it supports it without the upgrade/ But check the CPU support list on their website