Help with Nvidia Surround

[JoshuaTjandra]

So I have 3 monitors, 2 acer H23HL (1080p) bid and 1 QNIX (1440p)

 

I've set it so that all 3 run at 1080p 60hz. first acer is connected with DVI, 2nd acer with HDMI, QNIX with DVI

 

when i go to nvidia control panel to configure surround. It says Change monitor, all monitor mush have same resolution and refresh rate and sync polarity.

 

What am I doing wrong?

[bosfreak]

You have a 1440 and two 1080 monitors, i think (not sure though) it needs all three monitors to run the same native resolution

[bosfreak]

-edited-

[JoshuaTjandra]

Welp. I tried using softth but it doesn't work with assetto corsa currently. 

 

Anyone else have ideas?

[phillrulz]

Welp. I tried using softth but it doesn't work with assetto corsa currently. 

 

Anyone else have ideas?

when you set them all to run at that speed do you mean in software or physical with the buttons on the monitor ?as that is what you have to do

[JoshuaTjandra]

when you set them all to run at that speed do you mean in software or physical with the buttons on the monitor ?as that is what you have to do

I did it in software, made them all run at 1080p 59hz

[phillrulz]

I did it in software, made them all run at 1080p 59hz

 

try doing it with the buttons on the monitor

[roelversteeg]

typical problem with nvidia, most of the times you need 3 exacly the same monitors same branding and type, setting them all to 60hz and 1080p doesnt always work.

 

best of luck.

[PaulKolby]

You have a 1440 and two 1080 monitors, i think (not sure though) it needs all three monitors to run the same native resolution

yeps