Level 10 GT radiator compatibility

[MJOLNITR VIPER]

I was wondering recently if it was possible to get a 120mm radiator on the bottom of the case in front of the power supply on the lower portion of the case? 

 

 

[GeneralBear]

woudl be a tight fit if it would not to sure and is that a Tt big water?

[MJOLNITR VIPER]

i want to try and fit http://www.frozencpu.com/products/16235/ex-rad-409/Alphacool_NexXxoS_Monsta_Single_120mm_Radiator_-_80mm_Thick.html#blank or maybe one of these http://www.frozencpu.com/products/14855/ex-rad-331/Alphacool_NexXxoS_UT60_Full_Copper_Single_120mm_Radiator.html?tl=g30c95s159 if it is to tall.

[GeneralBear]

do you have a standerd size psu or a bigger one like in the pic?

[MJOLNITR VIPER]

do you have a standerd size psu or a bigger one like in the pic?

Standard, but am planning on going to a 1050 watt XFX.  

[GeneralBear]

dipending on how flexable cables are it might fit if their was no cables in the way looks like its a sure thing

[MJOLNITR VIPER]

yeah I want a rad in the top a 140 on the back (external) and the 120 on the bottom.  

 

Any suggestions on which one of the two rads to use?

[GeneralBear]

ive never done watercooling my self i got a h80i thast the most ive done so i dono what is the better rad my guess woudl be more surface erea so a thicker 120 over a thinner 120

[philipV]

I have the level 10 GT and a BE QUIET 1000w psu and i can fit a 120mm in the bottom and i woud take the  Alphacool NexXxoS UT60 Full Copper Single 120mm Radiator

[MJOLNITR VIPER]

I have the level 10 GT and a BE QUIET 1000w psu and i can fit a 120mm in the bottom and i woud take the  Alphacool NexXxoS UT60 Full Copper Single 120mm Radiator

push pull or just pull?

[Ghost]

You should note that that power supply is huge.

[philipV]

push pull or just pull?

just pull