PC boot failure

[Akari_Verdugo]

Hello again everyone well it seems I ran onto another snag. Just today I finished building my PC. So I have everything hooked up and wired but the CPU fan since I need thermal paste. So I decided just to test if everything is working correctly, and when I turned on my computer it gave me a couple of beeps. I then found my manual for the beep codes, but when I tried to turn the PC on again I see the blue led on my case glow and the fans turn on for a second or two then it boots back down. Waited a few minutes then hooked it up to my tv which is currently in front of me, the screen said CPU fan error ! Then booted Down. The psu am using is called thermal take TR2 600W. And its also on the right voltage 115-V since I live in America. Also I tried to see if I could get to the screen again with the motherboard name and what not but it turned on for a sec then booted straight off. Any suggestions ? Or is it I just need the CPU fan on?

[Akari_Verdugo]

I seemed to have gotten the beep codes according to my manual it seems to be a hardware component. Failure. Not sure which part tho, it could be the psu supply am not sure it seems to be missing a wire. And am not really sure if its suppose to or its just there

[Akari_Verdugo]

Bump

[William12h]

If you don't have a CPU Fan/Any Fan plugged into the CPU header fan connector on the MB you will get a post about it since it warning you saying like ' NO CPU FAN TURN OF NOOB U BLOW MY CPU AND KILL ME!!!' 

 

 

its even telling you that the error is the CPU FAN "CPU fan error !"  POST is there to protect your PC. In some situation where you have a Fanless heatsink or don't need or know what you're doing, you can turn off the CPU fan error by disabling the MB from monitoring the CPU Fan 

Edited August 19, 2014 by William12h

[Sonefiler]

Maybe because you don't have a CPU cooler? Derp?

It's idiot-proof.