False, DHCP readings?

[VeryFoul]

I have been having some problems with my IP address not changing as Comcast says it is setup too. I view my modem's settings and is state's DHCP is infact enabled, but when I view my ipconfig in my cmd, it reads as, Disabled.

 

I will screenshot a example, if you didn't understand the above text.

 

 

This is where Comcast states, DHCP is enabled.

 

This is where I view it in my command prompt and it states that it is disabled....

 

 

If you have any knowledge in this occurrence, I would appreciate it. Thank you.

[Darren]

In your IPv4 settings are you obtaining an address automatically rather than statically?

[fataldog187]

The entry that you see in command prompt under ipconfig/all would be for your local network adapter, it may be set up with a static ip address, this should not be confused with the wan interface on your modem/router, which can be assigned addresses via DHCP from your ISP without your LAN address changing.

[Mitch]

Are you able to post a full screen shot of an ipconfig /all command and of the interface of your router just to make sure you are in the right settings.

[dharmadrummer]

From a command prompt, enter

netsh interface ipv4 set address "local Area Connection" source=dhcp