It wonk turn on!

[ra_vo33]

Yesterday I just finished building my new computer. IT was working fine and starting, but now it won't turn on. I've checked all the cables to make sure they're all connected correctly, but still can't seem to find the problem. Any help would be great. Thanks.

[Tycho]

What hardware are you using?

[rustikles]

Hardware specs? Will it post at all or just not boot into the OS? Error codes? etc.

[Admiaczking]

One of your parts could be DOA

[Oshino Shinobu]

Any beeps? Fans spin up? Constant rebooting? Hardware specs? 

 

You've got to give us more than that. 

[Mistgrim]

There was a post like this some time back....dude forgot to plug in the cpu fan

[ra_vo33]

Specs

Intel core 15 4670k

MOBO asus sabertooth z97

GPU GTX 770

PSU Corsair RM750w

 

I havn't hooked it up to the monitor yet because every time i try no matter what cable I'm using it says "no [insert cable here]" But I have managed to get the computer to turn on, where the fans a re spinning etc. It just won't turn on now for some reason.

[Daigo]

There was a post like this some time back....dude forgot to plug in the cpu fan

 

Yeah a photo of the internals could be handy for helping out.

[Prokart2000]

Specs

Intel core 15 4670k

MOBO asus sabertooth z97

GPU GTX 770

PSU Corsair RM750w

 

I havn't hooked it up to the monitor yet because every time i try no matter what cable I'm using it says "no [insert cable here]" But I have managed to get the computer to turn on, where the fans a re spinning etc. It just won't turn on now for some reason.

is there any beeps and its an i5 not 15

[rustikles]

Specs

Intel core 15 4670k

MOBO asus sabertooth z97

GPU GTX 770

PSU Corsair RM750w

 

I havn't hooked it up to the monitor yet because every time i try no matter what cable I'm using it says "no [insert cable here]" But I have managed to get the computer to turn on, where the fans a re spinning etc. It just won't turn on now for some reason.

Have you plugged the video cables into the graphics card, rather than mobo video out? If it's a hardware issue, a working graphics output could give you a helpful post code.

[EmotionalSloth]

try turning it off and on again

[Mistgrim]

Did you check the power supply, there is the voltage switch and the on/off switch.....voltage should be 115 i think and the switch should be in the on position

[ra_vo33]

Have you plugged the video cables into the graphics card, rather than mobo video out? If it's a hardware issue, a working graphics output could give you a helpful post code.

Yeah, I've tried to use display port, VGA, HDMI, and DVI from the graphics card, and the MOBO, but it still won't recognize it.;

 

is there any beeps and its an i5 not 15

It hasn't made any noise, since it won't turn on.

 

Did you check the power supply, the is the voltage switch and the on/off switch.....voltage should be 115 i think and the switch should be in the on position

I have the O/I switch on O, but I'm not sure what you mean by checking the voltage.

[rustikles]

Yeah, I've tried to use display port, VGA, HDMI, and DVI from the graphics card, and the MOBO, but it still won't recognize it.;

How about using the mobo video outs without a graphics card installed?

[ViruZ_HUN]

There could be somethign wrong with the startbutton if the PC won't do anythign at all when you press it.

 

Try to plug out the Start button and touch the startpins with a screwdriver or something to make sure that it is not the startbutton which is causing the issue

 

(damn mod queue)

[Mistgrim]

 

I have the O/I switch on O, but I'm not sure what you mean by checking the voltage.

Switch should be on I, with the I pushed down...the voltage switch is flat, sometimes red and has the numbers 115 and 200 on it or 220....that should be on 115 if your in the US