Jump to content

NEED HELP

LOL-jpg
 Share
Go to solution Solved by KidKid,
14 minutes ago, LOL-jpg said:

currently using an asus rog x670ei for my 7800X3D but I cant increase its frequency to 5.05, it stays at 4.7 . Anyways to increase that?

PSU:seasonic core 780w

AIO:thermalright 240

RAM:gskill 16*2 6000 CL36

only thermal limits are increased to 90C and PBO enabled in BIOS

Make sure you're only stressing out one CPU core. The all-core boost is supposed to be 4.7Ghz, while the single core boost is over 5Ghz.

Posted

currently using an asus rog x670ei for my 7800X3D but I cant increase its frequency to 5.05, it stays at 4.7 . Anyways to increase that?

PSU:seasonic core 780w

AIO:thermalright 240

RAM:gskill 16*2 6000 CL36

only thermal limits are increased to 90C and PBO enabled in BIOS

Link to comment
https://linustechtips.com/topic/1615943-need-help/
Share on other sites
Link to post
Share on other sites
Posted

Do you have reason to believe this is possible? What methods are you using now? Are those all-core numbers? If you want to push clocks, swap in a 9800x3D. 

Ryzen 7 7800x3D -  Asus RTX4090 TUF OC- Asrock X670E Taichi - 32GB DDR5-6000CL30 - SuperFlower 1000W - Fractal Torrent - Assassin IV - 42" LG C2

Ryzen 7 5800x - XFX RX6600 - Asus STRIX B550i - 32GB DDR4-3200CL14 - Corsair SF750 - Lian Li O11 Mini - EK 360 AIO - Asus PG348Q

Link to comment
https://linustechtips.com/topic/1615943-need-help/#findComment-16753678
Share on other sites
Link to post
Share on other sites
Posted
19 minutes ago, LOL-jpg said:

currently using an asus rog x670ei for my 7800X3D but I cant increase its frequency to 5.05, it stays at 4.7 . Anyways to increase that?

PSU:seasonic core 780w

AIO:thermalright 240

RAM:gskill 16*2 6000 CL36

only thermal limits are increased to 90C and PBO enabled in BIOS

Did you do PBO +200 and CO -30 (or other negative)?

 

Mine reaches 5.05GHz.  Look in HWINfo64, not Task Manager.

 

Clarity:

 

7800X3D - PBO -30 all cores, 4.90GHz all core, 5.05GHz single core, Cinebench 23: 18401 multi, 1779 single

"Do what makes the experience better" - in regards to PCs and Life itself.

 

Onyx: AMD Ryzen 7 7800x3d / ASRock Taichi 7900xtx OC / Gigabyte B650 AORUS Pro AX / G. Skill Flare X5 6000CL36 64GB (4x16GB) / Samsung 980 1TB x3 / Super Flower Leadex V Platinum Pro 1000 / EK-AIO 360 Basic / Fractal Design North XL (black mesh) / AOC AGON 35" 3440x1440 100Hz / Mackie CR5BT / SteelSeries Arctis Nova Pro / Cherry MX Board 3.0 / Logitech G502 - https://valid.x86.fr/my9nnr

 

7800X3D - PBO -30 all cores, 4.90GHz all core, 5.05GHz single core, Cinebench 23: 18401 multi, 1779 single

 

Sage: Ryzen 7 7800X3D - Gigabyte B650 Gaming X V2 - ASRock Steel Legend 7900GRE - G. Skill Flare X5 32GB 6000CL32 - TeamGroup MP44L 2TB - Super Flower Leadex Platinum SE 1000w - NZXT H5 Elite

 

Emma: i9 9900K @5.1Ghz - MSI 6900XT Gaming X Trio - Gigabyte AORUS Z370 Gaming 5 - G. Skill Ripjaws V 32GB 3200CL16 - 750 EVO 512GB + 2x 860 EVO 1TB (RAID0) - Super Flower Combat FG 850w - Thermaltake Water 3.0 Ultimate 360mm - Fractal Design Define R6 - TP-Link AC1900 PCIe Wifi

 

Raven: AMD Ryzen 5 5600X3D - ASRock B550M Pro4 - G. Skill Ripjaws V 16GB 3200Mhz - Asus Prime 9060XT 16GB - Samsung 980 1TB + Crucial MX500 1TB - Cudy AX3000 PCIe Wifi 6 - Gigabyte GP-P450B PSU -  Cooler Master MasterBox Q300L -  LG 34" 3440x1440

 

Plex: AMD Ryzen 9 5900XT 16c/32t - Gigabyte B550M AORUS Elite AX - TeamGroup T-Force Vulcan 64GB 3200CL16 - MSI 1050Ti 4GB - Crucial P3 Plus 500GB + TeamGroup MP44L 2TB (Game) + WD Red NAS 4TBx2 (Plex) - TP-Link AC1200 PCIe Wifi - EVGA SuperNova 650 P2 - ASUS Prime AP201

 

GF Rig: Steam Deck 512GB OLED, Vizio 43" 4K TV

 

OnePlus Ecosystem: 

OnePlus 11 5G - 16GB RAM, 256GB NAND, Eternal Green

OnePlus Watch 2 - Radiant Steel

OnePlus Buds Pro 2 - Eternal Green

 

Other Interesting Tech:

- 2021 Volvo S60 Recharge T8 Polestar Engineered - 415hp/495tq 2.0L 4cyl. turbocharged, supercharged and electrified.

Link to comment
https://linustechtips.com/topic/1615943-need-help/#findComment-16753685
Share on other sites
Link to post
Share on other sites
Posted
12 minutes ago, LOL-jpg said:

currently using an asus rog x670ei for my 7800X3D but I cant increase its frequency to 5.05, it stays at 4.7 . 

What software are you using for the clocks? Single core or all core?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
https://linustechtips.com/topic/1615943-need-help/#findComment-16753688
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
14 minutes ago, LOL-jpg said:

currently using an asus rog x670ei for my 7800X3D but I cant increase its frequency to 5.05, it stays at 4.7 . Anyways to increase that?

PSU:seasonic core 780w

AIO:thermalright 240

RAM:gskill 16*2 6000 CL36

only thermal limits are increased to 90C and PBO enabled in BIOS

Make sure you're only stressing out one CPU core. The all-core boost is supposed to be 4.7Ghz, while the single core boost is over 5Ghz.

AMD Ryzen™ 5 5600g w/ Radeon Graphics | 16GB DDR4-3200 RAM | 256GB NVME SSD + 2TB HDD | Amazon Basics 2.0 Speakers

                                                                                            I'M JUST A REAL-LIFE TOM SAWYER

Link to comment
https://linustechtips.com/topic/1615943-need-help/#findComment-16753694
Share on other sites
Link to post
Share on other sites
Posted

For the 7800X3D, 5GHz is the max boost, which is only going to be achieved during lightly threaded workloads. All-core won't hit 5GHz.

 

On 7000 series X3D chips, overclocking is locked down. You are allowed to use Curve Optimizer to undervolt it, and you can enable PBO, but you cannot change its boost behavior directly. This is because the 3D V-Cache is stacked on top, so functionally thermally insulates the cores, which makes traditional overclocking dangerous - at least, according to AMD. So AMD locked down overclocking.

 

If you want more consistent clocks, you can use Curve Optimizer to give it an undervolt, which should help with thermals and thus improve the boosting characteristics (since Ryzen boosts higher at lower temperatures). That's your best bet with a 7800X3D.

 

The 9000 series X3D CPUs are the only ones that are truly unlocked for overclocking.

Link to comment
https://linustechtips.com/topic/1615943-need-help/#findComment-16753695
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×