Pc wont boot

[Eren1]

Could this be stopping my pc from booting? 
 

tried my cpu in another pc and was working but wont boot in my pc

[Hinjima]

3 minutes ago, Eren1 said:

Could this be stopping my pc from booting? 
 

tried my cpu in another pc and was working but wont boot in my pc

 

Yes, absolutely.

Bent pins are never good and most likely the problem if your CPU works in a different PC.

[DragonMaster436]

Do you have another motherboard to confirm that this is the issue?

[whispous]

1 minute ago, DragonMaster436 said:

Do you have another motherboard to confirm that this is the issue?

 

20 minutes ago, Eren1 said:

tried my cpu in another pc and was working but wont boot in my pc

[strange13930]

21 minutes ago, Eren1 said:

Could this be stopping my pc from booting? 
 

tried my cpu in another pc and was working but wont boot in my pc

swap motherboards

[spacepickle]

You got some bent pins there homie. Get a new motherboard or get very familiar with some tweezers.

 

[whispous]

19 minutes ago, strange13930 said:

swap motherboards

 

41 minutes ago, Eren1 said:

tried my cpu in another pc and was working but wont boot in my pc

 

[Eren1]

Ordered a new mb hopefully it works when it arrives 

[Hinjima]

3 minutes ago, Eren1 said:

Ordered a new mb hopefully it works when it arrives 

Unless that new motherboard has bent pins, it will work ( We know the CPU works as you tested it in a different motherboard ).

 

You have a different post where you said you ONLY changed the CPU cooler, this should not bend the pins in the motherboard.

Did you remove the CPU while swapping CPU coolers?

[Eren1]

7 hours ago, Hinjima said:

Unless that new motherboard has bent pins, it will work ( We know the CPU works as you tested it in a different motherboard ).

 

You have a different post where you said you ONLY changed the CPU cooler, this should not bend the pins in the motherboard.

Did you remove the CPU while swapping CPU coolers?

Yeh i had to remove the cpu as the new cooler artic liquid freezer, has a different mount than the original one 

[Eren1]

@Hinjima did you see my above comment.

 

i had to remove the cpu when fitting the cooler because the normal mount had to be removed to put the artic liquid freeze intel mount in.  

 

hopefully this fixes my issue