No display issue

[Syed Muhammad Faizan]

I have a system with a Ryzen 7500f, ASRock a620m hdv m.2 and a zotac rtx 3070 twin edge. It works good but last night while I was gaming the display went off, it was getting no signal (I use HDMI and don't have DP cable). After the display turned off, I unplugged the hdmi from the pc and connected it to my laptop, it worked fine there, so the display or the cable isn't the issue. Later I took out the gpu and then put it back in and it started working again, after like 20-30 mins the screen went black again so I reseated the gpu again. It didn't work the first try, then I connected it to my tv and the pc gave a display out. Then I connected it back to my monitor and it worked so I updated the graphics drivers to the latest and the latest windows update are installed aswell (can't check the version of drivers and windows cause no display) and it seemed to be working fine, I ran a 10 min furmark stress test and nothing out of the ordinary happened no crashes etc, it worked for about 1.5 hours after which it gave a blank screen, this time I was wearing headphones and I could still hear the song playing which means the pc didn't crash, also when I did winkey+ctrl+shift+b I can hear the beep. I turned the system off and left it for about 2 hours, then I booted again got the asrock logo and nothing after that. What could be the issue? Also side note the pc has blue screened about 10 times in the past month but when I run stress tests nothing happens, I ran cinebench, furmark and ycruncher for ram and everything worked fine (i ran the tests when pc blue screened)

[Tridefender]

Looks like failing GPU, try to ask for RMA if possible. If you can't, clean card and repaste. Use compressed air/ CO2 can to blow into the display ports and HDMI. Dust/rust can damage these

[Syed Muhammad Faizan]

8 minutes ago, Tridefender said:

Looks like failing GPU, try to ask for RMA if possible. If you can't, clean card and repaste. Use compressed air/ CO2 can to blow into the display ports and HDMI. Dust/rust can damage these

Yeah gonna send it in for RMA, just wanted to know that if the card still gives out a display sometimes that means it isn't like shorted and is covered under warranty right?

[Tridefender]

18 minutes ago, Syed Muhammad Faizan said:

Yeah gonna send it in for RMA, just wanted to know that if the card still gives out a display sometimes that means it isn't like shorted and is covered under warranty right?

Yes, looks like degraded solder and overheat

[CaptainNoob]

Sound like an issue with the port on the GPU side? Sometimes I bump the table the wrong way and the display goes

[Syed Muhammad Faizan]

5 hours ago, CaptainNoob said:

Sound like an issue with the port on the GPU side? Sometimes I bump the table the wrong way and the display goes

Unplugging and plugging the HDMI doesn't work. It worked only when I took the gpu out and put it back in